Siemens CFS364JN - Disconnect Switche - 3-Pole Type CFS Compact Fusible Switche - 200A - J FUSE PROV - 200KAIC

Disconnect Switches

Type CFS Compact Fusible Switches

Features

30 - 800A ratings

UL Listed under file #E121152 & CSA Certified under file #222227

Door mounted rotary handles with defeatable cover interlock

Meets UL/CSA requirements for both main and branch circuit applications

Compact size

100kA with Class CC fuses or up to 200kA with Class J fuses

Load break and horsepower rated

Quick make and break operation

All handles are padlockable with up to (3) padlocks with 5/16” hasps in the OFF position

Catalogue number CFS361C5, CFS361J5 and CNFS361 can be DIN-rail mounted and can be either front or side operated with standard rotary handles.

All CFS part numbers ending in N can be either front or side operated with standard rotary handles.

Handles are available in Type 1, 3R, 4/4X & 12 ratings

NFPA 79 field installed kits are available

30-400A, 200kA switches are provided with quick connect terminal provisions for voltage sensing or for 10A max. control circuits

Fusible switches, 3-pole 600V AC Max. 30-100A & 600-800A switches are also rated 250V DC Max when poles are field connected in series.

Ordering information

1.Select the panel mounted switch required based on Ampere, HP and AIC requirements. Switches with a right hand mechanism are standard, 30-100A  switches with a left hand mechanism are available.

2.Select handle based on environmental rating required.

3.Select operating shaft (200 or 400mm in length). For enclosure depths of 9.0” or less from panel mounting surface to inside of door use 200mm long shafts. For deeper enclosures use 400mm long shafts. 30A 100kA switches can be used in 10” deep enclosures (panel to inside of door) with 200mm shaft and CFSH5N handles.

Note: Be sure to check shaft and handle compatibility with the switch selected by using information provided in the selection tables.

4.Line & load lugs are provided as standard on 30-100A switches. Terminal kits are available for 200-800A switches if needed.

5.Auxiliary contact are available if needed as follows.

A. 30A switch CFS361C5 and non-fusible 30A switch CNFS361 will accept up to (4) aux contacts

B. 30A switch CFS361J5 will accept up to (2) aux contacts without an aux contact holder. If more than (2) aux contacts are required order aux contacts PLUS aux contact holder kit CFSAUXH1. All other switches will accept up to (4) aux contacts.

6.If non-fusible switch is required order a shorting bar for 60-600A switches or catalog number CNFS361 for 30A.

7.30-100A switches are designed to prevent inadvertent contact with live parts and shields are not required. 200 & 400A switches are not supplied with terminal shields. They are available as field installed kits for both line and load terminals. 400-800A switches are supplied as standard with line shields and terminal shroud kits are available for the load side.