Conduit & Fittings

IPEX Scepter Conduit Fittings, 1-1/2 in. PVC End Cap, Solvent Weld

* List price is for 2 Packs

IPEX Scepter Conduit Fittings, Nonmetallic Conduit Clamps & Wall Spacer, 1-1/4 Inch Size

* List price is for 4 Packs

IPEX Scepter Conduit Fittings, 3 in. PVC Coupling

Our Scepter One Piece Expansion Joint (OPEJ) is designed to accommodate thermal expansion and contraction on shorter runs of PVC Conduit. The OPEJ, supplied with a Nitrile O-ring for smooth functioning, is available in sizes from 1/2” to 2”.

IPEX Scepter Access Fittings, PVC Type LL Conduit Body, 4 inches Hub Size, Supplied with Threaded Brass Inserts, Combination Brass Head Screws, PVC Gasket and Cover.

IPEX Scepter 1 in. x 10 ft. Rigid PVC Electrical Conduit Pipe with Bell End, Grey Color

Scepter F Series Double Gang Boxes are molded with 1” conduit hubs and supplied with reducer bushings. The conduit hub(s) are field modified as 1/2”, 3/4” or 1” to accommodate job-site requirements. The appropriate quantity of 1” x 3/4” and 3/4” x 1/2” reducers to create the desired hub size are packaged with each F Series Double Gang Box.

IPEX 100 PVC Conduit Solvent Cement Come with Applicator Cap, 250ml (1/2 Pint) Size, Low Volatile Organic Compounds, Clear Color

IPEX Scepter 2 in. PVC Utility 90° Elbow Comes with Solvent Bell End, 36 in. Bend Radius

1/2 inch Diameter PVC O-Ring Expansion Joint, Maximum Length 12 inch, Minimum Length 8 inch, Travel 4 inches

IPEX Scepter PVC Conduit Fittings, Meter Hub, 2-1/2 Inch Size

IPEX Scepter Conduit Fittings, 6 in. PVC Non-Tapered Thread Terminal Adapter

IPEX Scepter 4 in. x 3 in. PVC Reducer Bushing, Used with Electrical Rigid PVC Conduit Fitting

IPEX Scepter PVC Gasket for W Series Cover, Except WDRE & RWDRE

* List price is for 4 Packs

The Scepter® 2" to 5" 5º molded couplings are produced from high quality, Schedule 40 PVC and feature a longer socket length which allows for easier installation in the field. These molded couplings are CSA approved and suitable for direct burial applications as well as exposed outdoor usage.

IPEX Scepter 1-1/2 in. PVC 45° Standard Elbow Comes with Solvent Bell End, CSA Approval

IPEX Scepter Access Fittings, PVC Type T Conduit Body, 1-1/2 inches Hub Size, Supplied with Threaded Brass Inserts, Combination Brass Head Screws, PVC Gasket and Cover.

IPEX Scepter Conduit Fittings, 1 Hole PVC Coated Steel Pipe Strap, 1 Inch Size

* List price is for 4 Packs

Scepter service entrance fittings are designed for use in overhead service entrance applications to connect cables to a box or enclosure. Made from durable PVC, it features a removable cover with spoke knockouts to eliminate sharp edges and wear from wires and cables.