Conduit & Fittings

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity, excellent tensile strength
• Highly resistant to UV, abrasion and corrosion, flame-retardant

WW-HW Harness Wrap Tape is vinyl backed, 5 mil tape. WW-HW adhesion strength allows for exceptional harnessing and bundling of cables. It is best used in the creation of wire harnesses and other applications that require the securing of cables or wires.

List price is for whole pack of 10 pieces.

WW-DC is designed for use in the data communications industry with superior adhesion and elasticity. WW-DC is a vinyl electrical tape ideal for splicing, wrapping, and insulating applications.

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity
• Highly resistant to UV, abrasion and corrosion, flame-retardant

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity
• Highly resistant to UV, abrasion and corrosion, flame-retardant

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity, excellent tensile strength
• Highly resistant to UV, abrasion and corrosion, flame-retardant

• Used for marking, identifying, wire harnessing and insulating up to 600V
• Used for jacketing on high voltage splices
• All weather performance, high tensile strength
• Resistant to UV, abrasion and corrosion, flame-retardant

List price is for whole pack of 10 pieces.

• Good adhesion and elasticity
• All weather performance
• Great tensile strength
• Resistant to UV, abrasion and corrosion
• Flame-retardant

List price is for whole pack of 10 pieces.

General Purpose Electrical Tape Black, 3/4" X 60 Ft, Vinyl 7mil, 600v, -7c to 80c, UL CSA

WW-MSR is a 125 mil (3.2mm) self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 volts. For water sealing ductwork, cable ends and all types of splices. Normally WW-MSR should be jacketed with vinyl tape.

WW-HRL is a 30 mil (0.76mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. WW-HRL amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing.

WW-HRL is a 30 mil (0.76mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. WW-HRL amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing.

WW-HRL is a 30 mil (0.76mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. WW-HRL amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing.

WW-HRL is a 30 mil (0.76mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. WW-HRL amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing.

WW-CP-202P is a printed, 20 mil, plasticized PVC tape with superior adhesion and corrosion protection. This tape can be used to protect against abrasion, corrosion, and impact on metal pipes, conduit, and fittings. It is suitable for use above and below ground.

WW-VMR is an insulating mastic with vinyl backing that provides the superior adhesion and dielectric strength required to seal and insulate electrical connections from buried, submerged or overhead cables up to 1000 volts. The vinyl backing adds mechanical strength and is resistant to UV rays.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-SC is an ethylene propylene rubber based, self-amalgamating and conducting tape. Its unsupported construction makes it ideal for use on power cable where accomodation of expansion and contraction due to load cycling is important. WW-SC is compatible with all extruded dielectric cable insulations. Meets ASTM D-4388 Type IV standard.