Conduit & Fittings

The vapour barrier extender is for use with Liteline recessed IC rated fixtures to prevent air leakage from entering into the attic. Suitable for ceilings and damp locations.

The vapour barrier extender is for use with Liteline 6" SlimLED fixtures, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

The vapour barrier extender is for use with Liteline 3½" and 4" retrofit IC fixtures that are approved for insulated ceilings, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

The vapour barrier extender is for use with Liteline SlimLED fi xtures, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

The vapour barrier extender is for use with Liteline SlimLED fi xtures, to prevent air leakage from your living space into the attic. Suitable for insulated ceilings.

A high performance 2-wire dimming solution suitable for constant voltage (24V DC) LED fixtures.

* This is a discontinued model. Sold while quantity last

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 0.5A Input Current - 1.05A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/hwb-dim-cdc-24v-30w.html

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 0.9A Input Current - 2.1A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/hwb-dim-cdc-24v-60w.html

Primary Voltage: 100-130V AC - Secondary Voltag: 24V DC - Dry / Damp Approved Location - Forward phase / ELV / TRIAC Dimming Tech - 50 / 60 Hz - 2A Input Current - 4A Output Current - Constant Voltage Power Supply Type - Class II Classification - Hard Wire Link Connector - Undercabinet Application

The LED-STR-BC-EL is a flexible extension leads designed for use will single colour 24V LED strip lights to extend the distance between two sections. For indoor use only (dry location).

Liteline LED-STR-6-RGBBC - 6" LED RGB Blank Connector for LED Strip - 24V

Liteline LED-STR-12-RGBBC - 12" LED RGB Blank Connector for LED Strip - 24V

The LED-STR3-72-DC-PF is an outdoor 72" LED strip power feed. It provides power from LED driver to single colour outdoor LED strip.

The LED-STR3-72-PF is an outdoor 72" LED strip power feed. It provides power from an outdoor LED driver to single colour outdoor LED strip.

LED-STR-PF is an indoor 12" (304.8mm) LED strip power feed. It provides power from LED driver to single colour LED strip.

LED-STR-RGBPF is an indoor 36" colour changing LED power feed. It provides power from driver (through a colour chaning controller) to a colour changing LED strip.

This power feed kit allows for supplying power to FORUM LED panels combined with a surface mount kit.

Liteline LEDSTR-36-PF - 36" Power Feed for LED Strip Light - 12V DC - White

Low Voltage Power Feeds are DazzLED LED In-Wall Light power feeds. They provide power from a compatible 24V LED driver to DazzLED 24V LED In-Wall Lights. Hardwire to DC2.1 jack.