Conduit & Fittings

The LED-RGB-24-PC is a programmable controller for colour changing LED lighting. It has programming functions and power-down memory function, with various of built-in programs to choose from. The LED-RGB-24-PC controls 3 channel load, and various types of dynamic lighting can be adjusted with the Radio Frequency (RF) remote control.

The LED-RGB-24-C is a colour changing LED controller that adopts an advanced micro-control unit. It is used to control a variety of colour changing LED light sources. It can carry out static charge.

LED-TP-18-BL is an 18-in flexible blank connector for use with single color indoor LED tape light.

LED-TP-18-RGBBL is an 18" (457.2mm) flexible blank connector for use with colour changing indoor LED tape light.

The LED-TP-72-DC-PF is a 24V power feed for use with TP5 and TP6 LED tape series. It allows for connecting the LED tape to a plug-in LED driver.

The LED-TP-72-PF is a 24V power feed for use with TP5 and TP6 LED tape series. It allows for connecting the LED tape to a hardwire LED driver.

LED-TP-RGBXC is a blank x-connector for use with colour changing indoor LED tape light.

LED-TP-XC is a blank x-connector for use with single colour indoor LED tape light.

LED-TP-BL-EL is a flexible extension leads. The LED-TP-BL-EL is designed for use with all 24V LED tape lights to extend the distance between two sections.

LED-TP-PF is an indoor 12" (304.8mm) LED tape power feed. It provides power from LED driver to single colour TP1 and TP2 LED tape.

LED-TP-RGBPF is an indoor 12" (304.8mm) colour changing LED tape power feed. It provides power from LED driver (through colour changing controller) to colour changing TP1 LED tape.

The LED-HWB-DC21-6-PF is a DazzLED™ LED In-Wall Light power feed. It provides power from a compatible 24V LED driver to DazzLED™ 24V LED In-Wall Lights.

LED-HWB-DIM-12V-20W is a Class 2, constant voltage, 12V, 20W max. dimmable LED driver with hardwire box and wiring hub; for use with 12V LED lighting products. Suitable for indoor use only.

LED-HWB-24V-24W is a Class 2, constant voltage, 24V, 24W max. LED driver with hardwire box; for use with 24V LED lighting products. Suitable for indoor use only.

A high performance 3-wire dimming solution suitable for constant voltage (24V DC) LED fixtures.

LED-HWB-24V-36W is a Class 2, constant voltage, 24V, 36W max. LED driver with hardwire box; for use with 24V LED lighting products. Suitable for indoor use only.

LED-HWB-24V-60W is a Class 2, constant voltage, 24V, 60W max. LED driver with hardwire box; for use with 24V LED lighting products. Suitable for indoor use only.

The LED touch dimmer uses a touch technique allowing it to function as an on/off switch and a dimmer. Used to dim 24V DC LED tape and strip lights.

This 48" PVC mounting channel securely mounts fl exible LED tape light (TP1 and TP2 series) to a surface.