Conduit & Fittings

RAB Design - Die cast aluminum cover with three 1/2″ openings - 2 brass screws, neoprene gasket and one plug installed in center hol

RAB Design - 4″ die cast Zinc cover with cork gasket

RAB Design - Aluminum rectangular cover plate with 1/2″ entries - Comes complete with gasket and one plug

RAB Design - 4″ die cast Zinc cover with cork gasket and one plug

RAB Design - Die cast aluminum cover with 1/2″ openings -  2 brass screws and neoprene gasket

RAB Design - Die cast zinc cover with cork gasket and 3/4″ hole

RAB Design - Die cast aluminum with three 1/2″ openings - 1 close-out plug, neoprene gasket and screws

RAB Design - Precision die cast aluminum, 4″ diameter box comes with two opposing mounting feet - There are 4 internal posts for mounting covers 90 degrees apart. Two additional posts at 180 degrees apart for universal cross bars. One post for ground wire screw plus all posts are 10-24 tapped - Five conduit entries, four on the side and one on the bottom - Each unit comes complete with neoprene gasket, 4 threaded plugs to match side entries, stamped aluminum cover with brass screws and one ground screw installed

The 5613 box is a 1/2″ One Gang Rectangular Zinc Box with 3 conduit entries. Comes with one green galvanized metal screw and two spare plugs, completed with a raw zinc finish.

RAB Design - Precision die cast zinc, 4″ diameter box comes with two opposing mounting feet - There are 4 internal posts for mounting covers 90 degrees apart. Two additional posts at 180 degrees apart for universal cross bars. One post for ground wire screw plus all posts are 10-24 tapped - Five conduit entries, four on the side and one on the bottom - Each unit comes complete with cork gasket, zinc plated screws, 3 threaded plugs to match side entries, stamped cover and one ground screw packaged inside the unit