Conduit & Fittings

The SK4500K Shorting Cap is a low-profile, locking-type photocontrol cap that closes the receptacle connectors of individual fixtures. This cost-effective solution allows a series of lights to perform as a collective unit (ON/OFF) while protecting the receptacle from outdoor elements.

Lens Sticker Accessory for EK4000 & K4000 Series Photocontrols

Light Guard Accessory for K4100 Series, K4200 Series Thermal Photocontrols

Light Guard Accessory for EK4000 Series Electronic Fix Mount Photocontrols

NightFox electronic photocontrols permanently install on outdoor electrical boxes, in-wall boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. Mounts internally to an enclosure with a minimum installation hole size of 5/8” diameter. Comes with 9" wire leads.

NightFox electronic photocontrols permanently install on outdoor electrical boxes, in-wall boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. Mounts internally to an enclosure with a minimum installation hole size of 5/8” diameter. Comes with 9" wire leads.

Fits standard incandescent light sockets - Controls interior and exterior lights - 150 Watt maximum, incandescent only - Not for use with CFL or LED - Make sure photocell sensor is not illuminated by any artificial light sources

PowerTap Receptacle - 7-Pin - C136.41 Compliant - Dusk-to-Dawn - 10' cable

Locking Type Receptacle Gasket

The K171H provides a receptacle for Locking Type photocontrols with dimming capabilities. The connector interface has a 3-prong power connection that is backward compatible with standard photocontrol units. Also, it offers four contact pads per ANSI C136.41 for dimming and additional control or sensor input.

The KPT0170-010 PowerTap allows light pole mounted ancillary devices to have quick access to electrical power. It taps into the power feed of a streetlight by connecting between the photocontrol and locking type receptacle. It does not disturb the operation of the light control unit, and it supports the 7-pin ANSI C136.41 style receptacle and controls.

K4200 Series - 1/2 in. - 14 threaded swivel, 1 9/16 in. (4.0 cm) Square, 5 1/2 in. (14.0 cm) Long

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/ek4227s.html

Equipped with an adjustable stem for mounting at almost any angle up to 80 degree. Models equipped with three 6 in. color coded leads.

* This is a discontinued model, we keep it here just for reference

Equipped with an adjustable stem for mounting at almost any angle up to 80 degree. Models equipped with three 6 in. color coded leads.

* This is a discontinued model, we keep it here just for reference

NightFox electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½”-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8” diameter. Come with 9" wire leads.

NightFox electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½”-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8” diameter. Come with 9" wire leads.

NightFox electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½”-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8” diameter. Come with 9" wire leads.

NightFox electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½”-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8” diameter. Come with 9" wire leads.

All models equipped with a light level slide adjustment and provides a 1/2 in. - 14 threaded stem. Washer gasket and locking nut are packaged with each photo control.

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/ek4436sm.html