Conduit & Fittings

150 CFM, 4" fixed flange, outside diameter: 7", Height: 18" (46cm), Weight: 13.8lbs. Carbon bed width: 1.6". Pressure drop at max CRM 80pa/.75wg, All PROfilter products come with a PREfilter included. All PROfilters have a Max Operating Temperature of 175°F.

* This item has been discontinued and is replaced by VORTEX PROFILTER PRO50. Please refer to the attahced specification sheet for details. The smallest recommended fan for the Pro50 is the VTX600.

The KBWC-15K is a Solid-State AC Motor Speed Fan Control. It is designed for mounting in a 2" X 4" electrical wall box. It operates from 115 Volts, 50/60 Hz, and has a maximum rating of 5.0 Amps @ 104°F (40°C). The variable-speed motor control contains an On/Off line switch and a high gain RFI noise suppression filter. Applications include range hoods, vibrators, humidifiers, fireplace blowers, fans, laminar flow hoods, heat tunnel sand stirrers.

Replacement prefilter suitable for the ProFilter 100.

Prewired with 120V Power Cord. Mounting Bracket included and can be Mounted in any Position. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Energy Efficient Variable Speed Motor, Compact and Super Quiet. 10 Year Warranty. 

Air pressure sensing switch with fixed set point. Fixed to operate on pressure rise at 0.05±0.02”w.c. (1.27±0.508 mm). Measured Media: Air, or combustion byproducts that will not degrade silicone.

Replacement mounting brackets are suitable for the Vortex Powerfan VTX600, VTX800L, VTX800, and VTX1000.

V-12XL is equipped with a mixed-flow impeller allowing more air volume than any other comparable impeller design and runs more quieter. 100% speed controllable and easing air flow adjustment (optional speed control). Permanently lubricated maintenance-free ball bearing motor. Power cord included. 

Spring-loaded backdraft dampers. Neoprene damper seal minimizes leakage. Requires from 0.04 to 0.08 inches wg pressure to open. Simple installation in any position. Entire assembly inserts into duct

Supplied with Mounting Bracket for Easy Installation. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Heavy Gage Steel Casting with a Hammertone Powder Coat Finish, Making it More Sound Absorbing, Durable, Impact Resistant and Rustproof. High Quality Maintenance-Free Balanced Motor, Make it Vibrant Free, Quieter and Longer Lasting.

MC3 is a Solid-State AC Motor Speed Fan Control. It is designed for mounting in a 2" X 4" electrical wall box. It operates from 115 Volts, 50/60 Hz, and has a maximum rating of 2.5 Amps @ 104°F (40°C). The variable-speed motor control contains an On/Off line switch and a high gain RFI noise suppression filter. Applications include range hoods, vibrators, humidifiers, fireplace blowers, fans, laminar flow hoods, heat tunnel sand stirrers.

Supplied with Mounting Bracket for Easy Installation. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Heavy Gage Steel Casting with a Hammertone Powder Coat Finish, Making it More Sound Absorbing, Durable, Impact Resistant and Rustproof. High Quality Maintenance-Free Balanced Motor, Make it Vibrant Free, Quieter and Longer Lasting.

The Vortex Powerfan VMF Series is an in-line duct fan specifically designed to maximize the airflow performance with minimal noise levels in a small, compact housing. MF500 / VMF500 is Suitable with a 5" Duct, 205CFM.

200CFM, 4" Flange, Outside Diameter: 7.5", Height 12" (30.5cm), Weight 7.1lbs, Pressure Drop at Max CFM 125pa/.05"wg, Recommended Fan: Vortex VTX400, VBC400

Replacement prefilter suitable for the ProFilter 50s.

Optional Galvanized Mounting Brackets for Horizontal or Vertical Installation. Suitable for V-Series Models V-12XL and V-14XL. 

Spring-loaded backdraft dampers. Neoprene damper seal minimizes leakage. Requires from 0.04 to 0.08 inches wg pressure to open. Simple installation in any position. Entire assembly inserts into duct

Supplied with Mounting Bracket for Easy Installation. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Heavy Gage Steel Casting with a Hammertone Powder Coat Finish, Making it More Sound Absorbing, Durable, Impact Resistant and Rustproof. High Quality Maintenance-Free Balanced Motor, Make it Vibrant Free, Quieter and Longer Lasting.

Spring-loaded backdraft dampers. Neoprene damper seal minimizes leakage. Requires from 0.04 to 0.08 inches wg pressure to open. Simple installation in any position. Entire assembly inserts into duct

Supplied with Mounting Bracket for Easy Installation. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Heavy Gage Steel Casting with a Hammertone Powder Coat Finish, Making it More Sound Absorbing, Durable, Impact Resistant and Rustproof. High Quality Maintenance-Free Balanced Motor, Make it Vibrant Free, Quieter and Longer Lasting.