Conduit & Fittings

One-piece conduit clamp, No screws or bolts to drop, Requires only a screwdriver or nutdriver for installation, Fits into open side of strut channel. Static Load 200 lb

* List Price is for Whole Pack of 100 Pieces

Conduit to Beam Clamp - 1" EMT - 1" Rigid - 1/2" Max Flange - 3 ft lb Torque - 100 lb Static Load - 1/4" Rod Size

* List Price is for Whole Pack of 50 Pieces

Neatly isolates, supports and secures MC/AC cables, Properly spaces MC/AC cable to help eliminate bundling and NEC® & CEC derating issues, Results in a "neat and workmanlike" installation. 10-2 Super Neutral, 0.430" – 0.560" Outer Diameter

* List Price is for Whole Pack of 25 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.910" – 2.875" Outer Diameter

* List Price is for Whole Pack of 50 Pieces

Ideal for larger feeder circuits, Accommodates 3/8" threaded rod trapeze drops, Up to 25% material savings over traditional methods, Reduces installation time up to 50%, Complies with UL® 2239. 4" EMT, 4" Rigid, 3/8" Rod

* List Price is for Whole Pack of 10 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load : 25 lb

* List Price is for Whole Pack of 100 Pieces

nVent Caddy 16MB18 - B18-Z Box/Conduit Hanger with Rod/Wire Clip, 3/4", 1" EMT, 1/4" Rod, #12 Wire

* List Price is for Whole Pack of 25 Pieces

Clip snaps on flange and cable snaps into clip.

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load: 75 lb

* List Price is for Whole Pack of 100 Pieces

One-piece cable/conduit clamp with protective boot, No screws or bolts to drop, Requires only a screwdriver or nutdriver for installation, Fits into open side of strut channel, FM® Specification Tested (from 1/2" to 4" of EMT Conduit Size). Static Load 1 350 lb, Ultimate Static Load 2 75 lb, Ultimate Static Load 3 50 lb

* List Price is for Whole Pack of 25 Pieces

BCSP Snap Close MC/AC Clamp

* List Price is for Whole Pack of 50 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 75 lb

* List Price is for Whole Pack of 50 Pieces

Snap Close Conduit/Pipe Clamp with Shot-Fire Bracket, 1/2", 3/4" EMT, 1/2", 3/4" Rigid/Pipe

* List Price is for Whole Pack of 50 Pieces

BC-MSM Conduit to Beam Clamp - Side Mount - 1" EMT - 1" Rigid/Pipe - 0.5" Max Flange - 20 ft lb Torque - 25 lb Static Load

* List Price is for Whole Pack of 100 Pieces

Neatly isolates, supports and secures MC/AC cables, Properly spaces MC/AC cable to help eliminate bundling and NEC® & CEC derating issues, Results in a "neat and workmanlike" installation. 0.560" – 0.690" Outer Diameter, 12-3 to 8-2 Isolated Ground Cable Size, 12-3 to 10-2 Super Neutral Cable Size, 1/4" Hole Size 1, 0.200" Hole Size 2

* List Price is for Whole Pack of 25 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 75 lb

* List Price is for Whole Pack of 50 Pieces

NM Cable to Rod/Wire Clip, 14-2, 12-2 NM, 0.28"–0.32" Outer Diameter, 3/8" Rod

* List Price is for Whole Pack of 100 Pieces

Only one piece to install, Fast hammer-on installation, Pre-riveted retainer strap is easily bent into position. 3/4", 1" Rigid, 1/8" – 1/4" Flange Thickness, Static Load 75 lb

* List Price is for Whole Pack of 50 Pieces

One assembly provides support for electrical box and/or conduit from beam flanges

* List Price is for Whole Pack of 25 Pieces