Conduit & Fittings

MC/AC Cable Clip with Shot-Fire Bracket, 14-2 to 10-3 MC/AC

* List Price is for Whole Pack of 100 Pieces

Clip snaps on flange and cable snaps into clip.

* List Price is for Whole Pack of 100 Pieces

Requires only a hammer to install, Available for EMT, rigid and aluminum conduit, Will pivot thru 360°, Ultimate Static Load: 25 lb, Orientation: Side Mount

* List Price is for Whole Pack of 100 Pieces

May be used for either vertical or horizontal installations, Eliminates need for offset bending conduit, Finger closure, no tools required, Static Load 1: 100 lb, Static Load 2: 25 lb

* List Price is for Whole Pack of 100 Pieces

Snap Close Conduit to Rod/Wire Clip - 14-2 to 12-3 MC/AC - 0.55"–0.71" Outer Diameter - 1/4" Rod - #12 Wire

* List Price is for Whole Pack of 100 Pieces

Push In Conduit to Conduit Clamp - 1/2" EMT1 - 3/4" EMT2 - 1/2" Rigid2 -  0.709"–0.866" Outer Diameter 1 - 0.866"–1.18" Outer Diameter 2 - 25 lb Ultimate Static Load

* List Price is for Whole Pack of 100 Pieces

Neatly isolates, supports and secures MC/AC cables, Properly spaces MC/AC cable to help eliminate bundling and NEC® & CEC derating issues, Results in a "neat and workmanlike" installation. 12-3 to 8-2 Isolated Ground Cable Size, 12-3 to 10-2 Super Neutral Cable Size, 0.560" – 0.690" Outer Diameter

* List Price is for Whole Pack of 25 Pieces

One-piece cable/conduit clamp with protective boot, No screws or bolts to drop, Requires only a screwdriver or nutdriver for installation, Fits into open side of strut channel, FM® Specification Tested (from 1/2" to 4" of EMT Conduit Size). Static Load 1 350 lb, Ultimate Static Load 2 75 lb, Ultimate Static Load 3 50 lb

* List Price is for Whole Pack of 10 Pieces

Recommended for supporting horizontal runs of conduit from the face of a structural member,Fastening hole in strap may be above or below conduit. 0.922" Outer Diameter, 1/4" Hole Size, 19 GA Thickness

* List Price is for Whole Pack of 100 Pieces

Ideal for smaller branch runs, Shot fire flange for direct attachment to ceiling/deck, Accommodates 3/8" and 1/4" threaded rod trapeze drops, Up to 25% material savings over traditional methods, Reduces installation time up to 50%, Complies with UL® 2239. 1" EMT, 1" Rigid, 3/8" Rod

* List Price is for Whole Pack of 20 Pieces

Push-In Metal Deck Conduit Clamp - 3/4" EMT - 1/2" Rigid - 0.866" Min - 1.181" Max - 0.752" Nom OD

* List Price is for Whole Pack of 100 Pieces

Used to attach conduit to wood, steel or concrete, Eliminates need for offset bending conduit, Works with power tools, screw guns or nails, May be attached after positioning conduit.

* List Price is for Whole Pack of 100 Pieces

Push-in conduit support, Conduit clip rotates 360 degrees, Supports conduit from purlin, Static Load: 100 lb

* List Price is for Whole Pack of 50 Pieces

MC/AC Cable Support Bracket with Rod/Wire Clip, 14-3 to 10-2 MC/AC, 8 Cable, 1/2", 5/8" Rod, 0.430" – 0.560" Outer Diameter, 10-2 Super Neutral Cable Size

* List Price is for Whole Pack of 25 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 25 lb

* List Price is for Whole Pack of 50 Pieces

Supports non-metallic sheathed cable with ground wire.

* List Price is for Whole Pack of 100 Pieces

Compliant with NEC® Article 300.4(d), allowing cable to be positioned a minimum of 1-1/4" from face of stud, Compliant with CEC Rule 12-618 for support of MC/AC cable. 0.600" Max Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Bolt Close Conduit/Pipe Clamp with Z Shot-Fire Bracket, 0.67"–0.84" Outer Diameter, 1/2" EMT, 1/2" Rigid/Pipe, Static Load 100 lb

* List Price is for Whole Pack of 50 Pieces

H-MSM Conduit/Pipe to Flange Clip - Side Mount - Spring Steel - 14-2 to 12-3 MC/AC - 9/16"–3/4" Flange - 25 lb Static Load - 0.551" – 0.709" Outer Diameter

* List Price is for Whole Pack of 100 Pieces