Conduit & Fittings

One assembly provides support for horizontal electrical box and conduit from threaded rod, Eliminates need for offset bending conduit, Provides independent first means of support for conduit and/or MC/AC cable

* List Price is for Whole Pack of 25 Pieces

Fix pipe or conduit perpendicular to a beam. Static Load 250 lb

* List Price is for Whole Pack of 25 Pieces

One assembly provides support for electrical box and/or conduit from beam flanges

* List Price is for Whole Pack of 25 Pieces

B18-MCS Box/MC/AC Cable Hanger, 14-2 to 12-3 MC/AC, 10-2 Super Neutral, 0.430" – 0.560" Outer Diameter, 4 Cable, 1/4" Hole Size, Plain

* List Price is for Whole Pack of 25 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 350 lb, Static Load 2 50 lb, 3.740" – 4.130" Outer Diameter

* List Price is for Whole Pack of 10 Pieces

One piece break apart strut clamp for EMT and Rigid conduit, Includes thread impression and captured screw. 1.160" – 1.320" Outer Diameter, Static Load 150 lb

* List Price is for Whole Pack of 100 Pieces

Snap Close Conduit to Rod/Wire Clip, 14-2 to 12-3 MC/AC, 0.55"–0.71" OD, 3/8" Rod

* List Price is for Whole Pack of 50 Pieces

Clip snaps on flange and cable snaps into clip.

* List Price is for Whole Pack of 100 Pieces

Requires only a hammer to install, Available for EMT, rigid and aluminum conduit, Will pivot thru 360°, Ultimate Static Load: 25 lb

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.410" – 1.740" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

No tools required for installation, Compliant with NEC® Article 300.4(d), allowing cable to be positioned a minimum of 1-1/4" from face of stud, Compliant with CEC Rule 12-618 for support of MC/AC cable. 0.600" Max Outer Diameter

* List Price is for Whole Pack of 100 Pieces

One assembly provides support for horizontal electrical box and conduit from threaded rod

* List Price is for Whole Pack of 25 Pieces

Neatly isolates, supports and secures MC/AC cables, Properly spaces MC/AC cable to help eliminate bundling and NEC® & CEC derating issues, Results in a "neat and workmanlike" installation. 0.430" – 0.560" Outer Diameter, 10-2 Super Neutral Cable Size

* List Price is for Whole Pack of 25 Pieces

One-piece cable/conduit clamp with protective boot, No screws or bolts to drop, Requires only a screwdriver or nutdriver for installation, Fits into open side of strut channel, FM® Specification Tested (from 1/2" to 4" of EMT Conduit Size). Static Load 1 200 lb, Ultimate Static Load 2 75 lb, Ultimate Static Load 3 50 lb

* List Price is for Whole Pack of 100 Pieces

BC-PSM Conduit to Beam Clamp - 1/2" EMT - 0.5" Max Flange - 15 lb Ultimate Static Load

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 75 lb

* List Price is for Whole Pack of 50 Pieces

Supports non-metallic sheathed cable with ground wire

* List Price is for Whole Pack of 100 Pieces

Fast and easy assembly for lightweight loads, No screws or bolts required, Ultimate Static Load ;100 lb

* List Price is for Whole Pack of 50 Pieces

One assembly provides support for electrical box and/or conduit from beam flanges, Comes with one conduit clip attached to each side with the ability to attach up to two more per side, Eliminates need for offset bending conduit, 66% less Drop Wires (rod/wire application)

* List Price is for Whole Pack of 25 Pieces