Conduit & Fittings

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 350 lb, Static Load 2 50 lb, 1.910" – 2.875" Outer Diameter

* List Price is for Whole Pack of 50 Pieces

Push In Conduit to Rod/Wire Clip - 1" EMT - 3/4" Rigid - 1/4" Rod - #12 Wire - 1/8"–3/8" Flange

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load : 25 lb

* List Price is for Whole Pack of 100 Pieces

One assembly provides support for electrical box and/or conduit from beam flanges, Eliminates need for offset bending conduit, 66% less Drop Wires (rod/wire application)

* List Price is for Whole Pack of 25 Pieces

Bolt Close Conduit/Pipe Clamp with Z Shot-Fire Bracket, 1"–1.315" Outer Diameter, 1" EMT, 1" Rigid/Pipe, Static Load 100 lb

* List Price is for Whole Pack of 50 Pieces

Recommended for supporting horizontal runs of conduit from the face of a structural member,Fastening hole in strap may be above or below conduit. 0.706" Outer Diameter, 1/4" Hole Size, 20 GA Thickness

* List Price is for Whole Pack of 100 Pieces

BCSP Universal Clip

* List Price is for Whole Pack of 50 Pieces

Wire Basket Support Clip, Retrofit, 0.4" Hole, 0.140" – 0.240" Diameter, Static Load 120 lb

* List Price is for Whole Pack of 50 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 25 lb

* List Price is for Whole Pack of 100 Pieces

Push-in installation of conduit, Eliminates need for offset bending conduit, May be used for either vertical or horizontal installations, Ultimate Static Load 1:25 lb, Ultimate Static Load 2:15 lb

* List Price is for Whole Pack of 100 Pieces

Requires only a hammer to install, Available for EMT, rigid, IMT and aluminum conduit, Will pivot thru 360°, Orientation: Top Mount, Ultimate Static Load: 25 lb

* List Price is for Whole Pack of 100 Pieces

Push-in installation of conduit, Eliminates need for offset bending conduit, Complete with shot-fire bracket and pre-assembled drive pin from DEWALT®, Quickly and easily attaches to concrete, steel or composite metal decking, Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools, Ultimate Static Load: 25 lb

* List Price is for Whole Pack of 50 Pieces

Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws

* List Price is for Whole Pack of 50 Pieces

One piece break apart strut clamp for EMT and Rigid conduit, Includes thread impression and captured screw. 1.740" – 1.900" Outer Diameter, Static Load 150 lb

* List Price is for Whole Pack of 50 Pieces

Cable Hanger with Shot-Fire Bracket, 1 3/4" Diameter, 1/8" Thickness, Ultimate Static Load 75 lb

* List Price is for Whole Pack of 100 Pieces

H-MSMR Conduit to Flange Clip with Retainer, Side Mount, 1/2", 3/4" EMT, 1/8"–1/4" Flange ,25 lb Static Load

* List Price is for Whole Pack of 50 Pieces

One assembly provides support for electrical box and/or conduit, Comes with one conduit clip attached to each side with the ability to attach up to two more per side

* List Price is for Whole Pack of 25 Pieces

Push-in conduit support, Conduit clip rotates 360 degrees, Supports conduit from purlin, Ultimate Static Load: 25 lb

* List Price is for Whole Pack of 50 Pieces

Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws

* List Price is for Whole Pack of 50 Pieces