Conduit & Fittings

MC/AC Cable Support Bracket with Rod/Wire Clip, 14-3 to 10-2 MC/AC, 8 Cable, 1/4" Rod, #8 Wire, 0.430" – 0.560" Outer Diameter, 10-2 Super Neutral Cable Size

* List Price is for Whole Pack of 25 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 75 lb

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. 1.220" – 1.510" Outer Diameter, Static Load 1 200 lb, Static Load 2 50 lb

* List Price is for Whole Pack of 100 Pieces

Fix pipe or conduit perpendicular to a beam. Static Load 300 lb

* List Price is for Whole Pack of 25 Pieces

Clip snaps on flange and cable snaps into clip.

* List Price is for Whole Pack of 100 Pieces

MC/AC Cable Support with Shot-Fire Bracket, 10-3 to 8-3 MC/AC, 12-3 to 10-2 Super Neutral, 7 Cable, 0.560" – 0.690" Outer Diameter

* List Price is for Whole Pack of 25 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.750" – 1.900" Outer Diameter

* List Price is for Whole Pack of 50 Pieces

Meets the requirements of NEC® Section 300.4(E), Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws.

* List Price is for Whole Pack of 50 Pieces

Fastens cables to top of flange， Requires only a hammer to install

* List Price is for Whole Pack of 100 Pieces

May be used for either vertical or horizontal installations, Eliminates need for offset bending conduit, Finger closure, no tools required, Static Load 1: 100 lb, Static Load 2: 25 lb

* List Price is for Whole Pack of 100 Pieces

Conduit to Beam Clamp - 1/2" EMT - 1/2" Rigid - 1/2" Max Flange - 3 ft lb Torque - 100 lb Static Load - 1/4" Rod Size

* List Price is for Whole Pack of 50 Pieces

Ideal as spacer between same or different size conduit, No tools required for installation, Top conduit to be used for support only, not a raceway, Ultimate Static Load: 25 lb

* List Price is for Whole Pack of 100 Pieces

Accommodates a wide range of electrical boxes, Contains embedded rivet nut - no penetrating the electrical box, Includes electrical box alignment pockets, Supports electrical boxes in 16" stud spacing (BCSP612)

* List Price is for Whole Pack of 10 Pieces

One piece break apart strut clamp for EMT and Rigid conduit, Includes thread impression and captured screw. 4" Outer Diameter, Static Load 350 lb

* List Price is for Whole Pack of 25 Pieces

Wire Basket Support Clip with Nut, 3/8" Rod, 0.140" – 0.240" Diameter, Static Load 120 lb

* List Price is for Whole Pack of 20 Pieces

Fix pipe or conduit parallel to a beam.

* List Price is for Whole Pack of 25 Pieces

Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws

* List Price is for Whole Pack of 25 Pieces

MC/AC Cable Support with Shot-Fire Bracket, 14-3 to 10-2 MC/AC, 10-2 Super Neutral, 8 Cable, 0.430" – 0.560" Outer Diameter

* List Price is for Whole Pack of 25 Pieces

May be used for either vertical or horizontal installations, Eliminates need for offset bending conduit, Finger closure, no tools required, Static Load 1: 100 lb, Static Load 2: 25 lb

* List Price is for Whole Pack of 100 Pieces