Conduit & Fittings

nVent Caddy 16MB186CO - B18-CO-Z Box/Multiple Conduit Hanger with Rod/Wire Clip - 1" EMT - 3/8" Rod

* List Price is for Whole Pack of 25 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 75 lb

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 0.740" – 1.050" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Clip snaps on flange and cable snaps into clip.

* List Price is for Whole Pack of 100 Pieces

One assembly provides support for electrical box and/or conduit from beam flanges, Comes with one conduit clip attached to each side with the ability to attach up to two more per side

* List Price is for Whole Pack of 25 Pieces

May be used for either vertical or horizontal installations, Eliminates need for offset bending conduit, Finger closure, no tools required, Static Load 1: 100 lb, Static Load 2: 25 lb

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 350 lb, Static Load 2 50 lb, 3.150" – 3.500" Outer Diameter

* List Price is for Whole Pack of 25 Pieces

Attaches to open side of a strut channel,Provides means to support conduit running perpendicular to strut. 0.866" – 1.181" Outer Diameter, 3/8" Flange Thickness, 1/2" Rigid Conduit Size, Ultimate Static Load 1 15 lb, Ultimate Static Load 2 25 lb

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 75 lb

* List Price is for Whole Pack of 50 Pieces

Push In Conduit to Conduit Clamp - 1/2" EMT1 - 1/2" EMT2 - 0.709"–0.866" Outer Diameter 1 - 0.709"–0.866" Outer Diameter 2 - 25 lb Ultimate Static Load

* List Price is for Whole Pack of 100 Pieces

One piece break apart strut clamp for EMT and Rigid conduit, Includes thread impression and captured screw. 2.880" Outer Diameter, Static Load 350 lb

* List Price is for Whole Pack of 50 Pieces

Fix pipe or conduit parallel to a beam.

* List Price is for Whole Pack of 25 Pieces

Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws

* List Price is for Whole Pack of 25 Pieces

Neatly isolates, supports and secures MC/AC cables, Properly spaces MC/AC cable to help eliminate bundling and NEC® & CEC derating issues, Results in a "neat and workmanlike" installation. 0.430" – 0.560" Outer Diameter, 10-2 Super Neutral Cable Size

* List Price is for Whole Pack of 25 Pieces

Supports cable and conduit without bending drop wire, Faster installation than traditional methods. 1/4" Hole, Ultimate Static Load 25 lb

* List Price is for Whole Pack of 100 Pieces

BC-P Conduit to Beam Clamp - 1/2" EMT - 0.5" Max Flange - 25 lb Ultimate Static Load

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load : 25 lb

* List Price is for Whole Pack of 100 Pieces

Requires only a hammer to install, Available for EMT, rigid and aluminum conduit, Will pivot thru 360°, Ultimate Static Load: 25 lb, Orientation: Top Mount

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 25 lb

* List Price is for Whole Pack of 100 Pieces