Conduit & Fittings

Snap Close Conduit to Rod/Wire Clip - 1/2"-3/4" EMT - 0.71–1.18" Outer Diameter - 1/4" Rod - #12 Wire

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load : 25 lb

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. 1.410" – 1.740" Outer Diameter, Static Load 1 200 lb, Static Load 2 50 lb

* List Price is for Whole Pack of 100 Pieces

One-piece conduit clamp, No screws or bolts to drop, Requires only a screwdriver or nutdriver for installation, Fits into open side of strut channel. Static Load 200 lb

* List Price is for Whole Pack of 100 Pieces

Recommended for supporting horizontal runs of conduit from the face of a structural member,Fastening hole in strap may be above or below conduit. 1.163" Outer Diameter, 1/4" Hole Size, 18 GA Thickness

* List Price is for Whole Pack of 100 Pieces

Used to attach conduit to wood, steel or concrete, Eliminates need for offset bending conduit, Works with power tools, screw guns or nails, May be attached after positioning conduit. 0.709" – 1.181" Outer Diameter, 3/16" Hole

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. 0.670" – 0.840" Outer Diameter, Static Load 1 200 lb, Static Load 2 50 lb

* List Price is for Whole Pack of 100 Pieces

Requires only a hammer to install, Available for EMT, rigid, IMT and aluminum conduit, Will pivot thru 360°, 25 lb Ultimate Static Load, Top Mount

* List Price is for Whole Pack of 100 Pieces

Requires only a hammer to install, Available for EMT, rigid, IMT and aluminum conduit, Will pivot thru 360°, Orientation: Top Mount, Ultimate Static Load: 25 lb

* List Price is for Whole Pack of 50 Pieces

One assembly provides support for electrical box and/or conduit, Comes with one conduit clip attached to each side with the ability to attach up to two more per side

* List Price is for Whole Pack of 25 Pieces

Cable Hanger, 1 3/4" Diameter, 1/8" Thickness, Ultimate Static Load 75 lb

* List Price is for Whole Pack of 100 Pieces

One assembly provides support for electrical box and/or conduit from drop wire or rod

* List Price is for Whole Pack of 25 Pieces

Neatly isolates, supports and secures MC/AC cables, Properly spaces MC/AC cable to help eliminate bundling and NEC® & CEC derating issues, Results in a "neat and workmanlike" installation. 0.430" – 0.560" Outer Diameter, 10-2 Super Neutral Cable Size

* List Price is for Whole Pack of 25 Pieces

Meets the requirements of NEC® Section 300.4(E), Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws.

* List Price is for Whole Pack of 50 Pieces

Conduit to Beam Clamp - 1 1/2" Rigid - 1/2" Max Flange - 3 ft lb Torque - 100 lb Static Load - 1/4" Rod Size

* List Price is for Whole Pack of 25 Pieces

Snap Close Conduit to Rod/Wire Clip - 1" EMT - 1.18"–1.38" Outer Diameter - 1/4" Rod - #12 Wire

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load : 75 lb

* List Price is for Whole Pack of 100 Pieces

B18-SBT-TDH Box/Multiple Conduit with Deck Hanger

* List Price is for Whole Pack of 25 Pieces

Ideal for larger branch circuits, Accommodates 3/8" and 1/4" threaded rod trapeze drops, Up to 25% material savings over traditional methods, Reduces installation time up to 50%, Complies with UL® 2239. 1 1/4" EMT, 1 1/4" Rigid, 3/8" Rod