Conduit & Fittings

BC-M Conduit to Beam Clamp, 1/2", 3/4" EMT, 1/2", 3/4" Rigid/Pipe, 0.709"–1.181" OD, 0.5" Max Flange - 100 lb Static Load

* List Price is for Whole Pack of 100 Pieces

Ideal for larger feeder circuits, Accommodates 3/8" threaded rod trapeze drops, Up to 25% material savings over traditional methods, Reduces installation time up to 50%, Complies with UL® 2239. 4" EMT, 4" Rigid, 3/8" Rod

* List Price is for Whole Pack of 10 Pieces

May be used for either vertical or horizontal installations, Static Load 1: 100 lb, Static Load 2: 25 lb

* List Price is for Whole Pack of 100 Pieces

No tools required for installation, Compliant with NEC® Article 300.4(d), allowing cable to be positioned a minimum of 1-1/4" from face of stud, Compliant with CEC Rule 12-618 for support of MC/AC cable. 0.600" Max Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 0.740" – 1.050" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Clip snaps on flange and cable snaps into clip.

* List Price is for Whole Pack of 100 Pieces

Push-in installation of conduit, Eliminates need for offset bending conduit, May be used for either vertical or horizontal installations, Ultimate Static Load 1: 25 lb, Ultimate Static Load 2: 15 lb

* List Price is for Whole Pack of 100 Pieces

MC/AC Cable Support Bracket with Rod/Wire Clip, 14-3 to 10-2 MC/AC, 4 Cable, 1/4" Rod, #8 Wire, 10-2 Super Neutral, 0.430" – 0.560" Outer Diameter

* List Price is for Whole Pack of 25 Pieces

BCSP Snap Close Conduit Clamp, 3/4", 1" EMT, 3/4", 1" Rigid

* List Price is for Whole Pack of 50 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 25 lb

* List Price is for Whole Pack of 50 Pieces

One piece break apart strut clamp for EMT and Rigid conduit, Includes thread impression and captured screw. 0.710" – 0.840" Outer Diameter, Static Load 150 lb

* List Price is for Whole Pack of 100 Pieces

May be used for either vertical or horizontal installations, Eliminates need for offset bending conduit, Finger closure, no tools required, Static Load 1: 100 lb, Static Load 2: 25 lb

* List Price is for Whole Pack of 100 Pieces

Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws

* List Price is for Whole Pack of 50 Pieces

BC-P Conduit to Beam Clamp - 1" EMT - 3/4" Rigid - 1.181"–1.378" OD - 0.5" Max Flange - 20 ft lb Torque - 25 lb Static Load

* List Price is for Whole Pack of 100 Pieces

Push-in installation of conduit, Eliminates need for offset bending conduit, May be used for either vertical or horizontal installations, Ultimate Static Load 1: 25 lb, Ultimate Static Load 2: 15 lb

* List Price is for Whole Pack of 100 Pieces

BC-P Conduit to Beam Clamp, 3/4" EMT, 1/2" Rigid, 0.5" Max Flange, 20 ft lb Torque, 25 lb Ultimate Static Load

* List Price is for Whole Pack of 100 Pieces

Neatly isolates, supports and secures MC/AC cables, Properly spaces MC/AC cable to help eliminate bundling and NEC® & CEC derating issues, Results in a "neat and workmanlike" installation. 0.430" – 0.560" Outer Diameter, 10-2 Super Neutral Cable Size

* List Price is for Whole Pack of 25 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Requires only a hammer to install, Static Load: 25 lb

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. 1.220" – 1.510" Outer Diameter, Static Load 1 200 lb, Static Load 2 50 lb

* List Price is for Whole Pack of 100 Pieces