Conduit & Fittings

This WP1010HMXD (AKA Slim) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

Non-metallic Liquid-tight 90 Degree 1 1/4 Inch Connector For Use With Type B Conduit. Produced From UV Rated Plastic For Long Outdoor Life.

* List price for whole pack of 2 pieces

Non Metallic straight snap2it connector for use with non metallic liquid tight conduit type B only. Push on installation. 2" Trade Size.

* List Price is for Whole Pack of 2 Pieces.

Non-metallic Liquid-tight Straight 3/8 Inch Connector For Use With Type B Conduit - Produced From UV Rated Plastic For Long Outdoor Life.

* List price for whole pack of 25 pieces

Eaton LTCOND100NM500 - 1” Non-metallic Liquidtight Conduit Fitting -Type B - 500 FT - Gray

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Non Metallic 45 degree connector for use with non metallic liquid tight conduit type B only. 3/4" Trade Size.

* List price for whole pack of 10 pieces

This WP1250MVXD (AKA Chubs) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

Non-metallic Liquid-tight 90 Degree 3/8 Inch Connector For Use With Type B Conduit. Produced From UV Rated Plastic For Long Outdoor Life.

* List price for whole pack of 10 pieces

Non Metallic 90 degree snap2it connector for use with non metallic liquid tight conduit type B only. Push on installation. 2" Trade Size.

* List Price is for Whole Pack of 2 Pieces.

Single-gang Vertical with (WP17) Flexi-Guard Inserts, 2-1/4-Inch Depth, Gray - Complies with 2008 NEC Article 406.8(B) - Patented inserts offer more configurations and cover more jobs - Heavy-duty polycarbonate construction - Meets requirements for cold impact testing at -60 Degree Fahrenheit (-51 Degree Celsius)

Non-metallic Liquid-tight Straight 3/4 Inch Connector For Use With Type B Conduit - Produced From UV Rated Plastic For Long Outdoor Life.

* List price for whole pack of 10 pieces

Etlin Daniels - Liquid Tight Strain Relief Connectors - 3/8'' NPT Thread - Nylon - Grey Color ( Lock Nut not included )

* Listed Price is for Whole Case of 100 Pieces

Non Metallic straight snap2it connector for use with non metallic liquid tight conduit type B only. Push on installation. 1-1/4" Trade Size.

* List Price is for Whole Pack of 5 Pieces.

Non-metallic Liquid-tight Straight 1 1/4 Inch Connector For Use With Type B Conduit - Produced From UV Rated Plastic For Long Outdoor Life.

* List price for whole pack of 5 pieces

Non Metallic 45 degree connector for use with non metallic liquid tight conduit type B only. 1-1/2" Trade Size.

* List price for whole pack of 2 pieces

Eaton LTCOND50NM1000 - 1/2” Non-metallic Liquidtight Conduit Fitting -Type B - 1000 FT - Gray

The WP1110GC plastic in-use covers are easy to install and shipped with gasket, mounting screws, base cover assembly, and patented inserts for serve applications, such as schools and commercial buildings. Single-gang covers mount vertically and horizontally.

Non Metallic 45 degree connector for use with non metallic liquid tight conduit type B only. 3/8" Trade Size.

* List price for whole pack of 10 pieces