Conduit & Fittings

Outdoor Load Center with 150A Main Circuit Breaker Factory Installed, 20 Spaces, NEMA 3R Rated. Includes Enclosure, and Door. Designed for use in Canada.

The Leviton Angle Iron Bracket Accessory provides considerable time savings during installation of flush mounted NEMA 1 rated indoor load centers by allowing pre-fabrication in the shop before arrival at the job site. During installation, simply mount brackets onto the front of the studs without the hassle of needing to align the panel on the sides

Required for service entrance applications, the Bonding Strap Kit connects the ground bus to the neutral bus. 2 screws included for installation. Designed to work with Leviton Load Centers

Supplied with integral mounting feet, Threaded brass inserts and grounding clips or bars.

IPEX PVC Octagonal Box Extension Ring, 4 x 1 Inch Deep Size

Octagonal Boxes are shipped complete with cover, gasket, 4 reducing bushings (3/4” x 1/2”), and 4 sealing caps to be installed from inside box to seal off unused entry hubs.

IPEX PVC Octagonal Box Extension Ring, 4 x 2 Inch Deep Size

IPEX Floor Box Stand Kit (includes FB Box) is equiped with several height brackets which accommodate the different rebar and post-tension cable heights and slab depths found from job-site to job-site.

Octagonal Boxes are shipped complete with cover, gasket, 4 reducing bushings (3/4” x 1/2”), and 4 sealing caps to be installed from inside box to seal off unused entry hubs.

Junction Box Adapters are installed using a standard PVC coupling, offering a trouble-free and reliable PVC connection. In addition to providing a strong connection, the JBA also maximizes the interior box wiring space unlike the use of male adapters (TA).

Scepter Flanged PVC Junction Box provides H10 Highway Loading equivalent to handling a 50 psi load. The fiber-reinforced safety tread cover secures using recessed Hex Key fastening hardware offering a simple installation while reducing the opportunity for tampering.

Scepter PVC Molded Junction Box, Supplied with Threaded Brass Insert, Brass Screws, PVC Gasketing and Mounting Feet. NEMA Rated 1, 2, 3, 4, 4X, 6P, 12, 13 and UL Approved for Use in Wet Locations.

Scepter PVC Molded Junction Box, Supplied with Threaded Brass Insert, Brass Screws, PVC Gasketing and Mounting Feet. NEMA Rated 1, 2, 3, 4, 4X, 6P, 12, 13 and UL Approved for Use in Wet Locations.

Junction Box Adapters are installed using a standard PVC coupling, offering a trouble-free and reliable PVC connection. In addition to providing a strong connection, the JBA also maximizes the interior box wiring space unlike the use of male adapters (TA).