Conduit & Fittings

Sprinkler / Irrigation Timers with 14-Day Skipper, NEMA 3R - Plastic Case, 125V DPST 25 Amp 1.5 HP With Rain Sensor Input terminal

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

The ET2815C 365/7-Day Astronomic Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. Each circuit can be independently scheduled for Astronomic (Dusk/Dawn) ON/OFF events. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a supercapacitor to provide time and date retention for a minimum of 100 hours, and do not require batteries. Housed in a lockable enclosure for vandalism and tampering protection.

125V SPDT 1 Hour Cycle With 30 Second Tripper Actuating Time, NEMA 1 Indoor Steel Enclosure.

The 2T308A Flushmount Enclosure is for concealing mechanism in wall and giving a finished, flushed appearance. It has a heavy-duty, .063" formed steel construction with hinged door and gray finish with powder coat paint. It has a combination ½ inch - ¾ inch nominal knockouts one each side, and two on bottom, plus one 1" knockout on top and bottom with convenient mounting holes.

* Available for SERIES T100, T170, T180, T1900, T2000 and C8800. NOT FOR T1400/T1800/T1900 MODELS WITH BCR SUFFIX.

The ET2845C 365/7-Day Astronomic Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. Each circuit can be independently scheduled for Astronomic (Dusk/Dawn) ON/OFF events. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a supercapacitor to provide time and date retention for a minimum of 100 hours, and do not require batteries. Housed in a lockable enclosure for vandalism and tampering protection.

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

The ET2825C 365/7-Day Astronomic Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. Each circuit can be independently scheduled for Astronomic (Dusk/Dawn) ON/OFF events. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a supercapacitor to provide time and date retention for a minimum of 100 hours, and do not require batteries. Housed in a lockable enclosure for vandalism and tampering protection.

NEMA 1 Rated Indoor Steel Enclosure in gray finish. 208-277V, DPST, 40 Amp, " Little Gray Box".

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

The ET2815CP 365/7-Day Astronomic Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. Each circuit can be independently scheduled for Astronomic (Dusk/Dawn) ON/OFF events. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a supercapacitor to provide time and date retention for a minimum of 100 hours, and do not require batteries. Housed in a lockable enclosure for vandalism and tampering protection.

Sprinkler / Irrigation Timers with 14-Day Skipper, NEMA 3R - Plastic Case, 125 V SPST 15 Amp

The ET2805CR 365/7-Day Astronomic Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. Each circuit can be independently scheduled for Astronomic (Dusk/Dawn) ON/OFF events. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a supercapacitor to provide time and date retention for a minimum of 100 hours, and do not require batteries. Housed in a lockable enclosure for vandalism and tampering protection.

125V SPDT 10 Minute Cycle With 5 Second Tripper Actuating Time, NEMA 1 Indoor Steel Enclosure.

The ET2745CP 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

* ET8215 Models feature contacts that can be field configured to act as two independently operated SPST, one simultaneously operated DPST, or independently pulsed SPST for contactor and bell ringing applications.

The ET2725CR 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

* ET8215 Models feature contacts that can be field configured to act as two independently operated SPST, one simultaneously operated DPST, or independently pulsed SPST for contactor and bell ringing applications.