Conduit & Fittings

The ETCB28253PCR Electronic All-Purpose Contractor Box provides an easy-to-install solution for a variety of application needs. The Contractor Box comes with a pre-installed Astronomic timer with 7-day, holiday/exception period scheduling, USB for Schedule transfer and Backup, a 3 pole 60 A contactor, as well as inputs for overrides and surge protective devices.

The ET2725C 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

* ET1725 Models feature contacts that can be field configured to act as two independently operated SPST, one simultaneously operated DPST, or independently pulsed SPST for contactor and bell ringing applications.

* CPD82 Models feature NEMA 3R high impact polycarbonate plastic enclosure with clear cover for easy viewing of time switch mode and current status.

*This is an obsolete model, the suggested replacement is ET2725CP.

https://www.bulbspro.com/et2725cp.html

The grasslin by intermatic WHAVQ4 electric water heater time switch significantly reduces the annual cost of operating your electric water heater. It automatically adjusts voltages between 120 and 277 vac with a manual override switch. This time switch is a universal electromechanical controller, which can be field-configured for various power supply voltages capable of operating residential, commercial, and industrial water heaters with a maximum 10,000 watt capacity at 250 vac.

Sprinkler / Irrigation Timers with 14-Day Skipper, NEMA 3R - Plastic Case, 208-277V DPST 25 Amp 3 HP With Rain Sensor Input terminal

The ET2715C 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

* CPD82 Models feature NEMA 3R high impact polycarbonate plastic enclosure with clear cover for easy viewing of time switch mode and current status.

125V SPDT 4 Hr. Cycle With 120 Second Tripper Actuating Time, NEMA 1 Indoor Steel Enclosure.

The 2T2365GA Flushmount Enclosure is for concealing mechanism in wall and giving a finished, flushed appearance. It has a heavy-duty, .063" formed steel construction with hinged door and gray finish with powder coat paint. It has a combination ½ inch - ¾ inch nominal knockouts one each side, and two on bottom, plus one 1 inch knockout on top and bottom with convenient mounting holes.

* Available for SERIES ET100C, ET170C, ET700C and models EH10, EH40, ET279C, ET7115C, ET7215C, ET70215C and ET70115C.

The ET2705CP 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

Support multi-interface simultaneous connection, easy and convenient laptop expansion, 87W PD charging interface, you can use it while charging, 4Kx2K HDTV Output

1-Hour Cycle Timer, NEMA 3R Outdoor Plastic Enclosure, 120V 60Hz, Flush, surface or DIN rail mounting, Captive trippers enable setting up to 48 ON/OFF times in 1.25-minute increments

The ET2745C 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

The ET2725CP 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

* Astronomic feature provides sunset ON and sunrise OFF settings to eliminate the need for separate photo control devices.

ET8000 Series automatically switches loads according to a preset weekly schedule with to-the-minute accuracy.The independent 7-day programming provides complete flexibility for applications where load switching differs each day of the week. Astronomic programming can be combined with independent programs to provide a sunset ON and timed OFF program.

The ET2715CR 365/7-Day Electronic Control features independent 7-day programming for convenient flexibility when load switching differs daily. This electronic control provides dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 48 ON and 48 OFF events can be preset to automatically repeat. Each event can be applied to any combination of circuits and days. In addition, the programming can be easily disabled by changing to the manual operating mode. An additional mode of operation allows for the ON/OFF buttons to be used as a 2-hour override, in compliance with current regulations. Manual circuit control buttons operate circuits independently, based on the mode of operation. 50 Holiday Block Scheduling exception dates are available to prevent regularly scheduled events, or allow for a holiday schedule. Comes equipped with a time and date retaining supercapacitor for a minimum of 100 hours, eliminating battery dependency. Housed in a lockable enclosure for vandalism and tampering protection.

Permits Different Operation Each Day.

Upgrading to an electronic time switch has never been easier with the new Intermatic ET1700 Series 7-day electronic time switch. The timer features pulsed contact, an automatic daylight saving time adjustment, multi-volt operation from 120 to 277 VAC, and to-the-minute programming for accurate load control and reduced energy costs. Up to 28 set points or events (14 ON/14 OFF per channel) can be distributed throughout the days of the week and the program can be overridden at any time. Two industrial grade AAA Alkaline batteries provide 3 years minimum program and timing protection.

* ET1725 Models feature contacts that can be field configured to act as two independently operated SPST, one simultaneously operated DPST, or independently pulsed SPST for contactor and bell ringing applications.