Conduit & Fittings

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-SC is an ethylene propylene rubber based, self-amalgamating and conducting tape. Its unsupported construction makes it ideal for use on power cable where accomodation of expansion and contraction due to load cycling is important. WW-SC is compatible with all extruded dielectric cable insulations. Meets ASTM D-4388 Type IV standard.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RMR is a self-bonding mastic tape consisting of an ethylene propylene rubber (EPR) backing, bonded to a tacky temperature stable, electrical grade mastic. Use for insulating and moisture sealing splices and terminations on solid dielectric cable. Provides excellent electrical properties, superior adhesion, moisture and chemical resistance. For primary insulation up to 2kV.

Easy-Wrap Gaffers Tape is a professional grade, cloth coated tape with a matte-black finish. This tape is ideal for a multitude of applications in hospitality, exhibition/trade show, audio visual, and theatrical industries

Techspan 669972B - Wrap ‘N’ Seal Automotive Tape (Self-Fusing) - 22FT x 0.750" x 0.030" - Black - 50 Rolls/Carton

Techspan 769999 - PVC Electrical Tape - 60' x 3/4" x 0.007" - Black - 10 Rolls/Sleeve

• Forms a tough, flexible coating on metal, rubber and plastic to help waterproof connections
• Quick drying formula
• Excellent for hard to tape places
• Absorbs vibrations which prevents terminal screws from loosening
• Stays clean and neat
• Will not crack or unravel
• Can also be used as a thread locker or gasket sealer
• Applicator brush included
• Can be used in automotive, marine, heavy-duty, RV, industrial and  electrical applications
• 118mL (4 fl oz.) can

WW-HR is an ethylene rubber based high voltage tape with excellent electrical, chemical and physical properties. WW-HR is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-HR is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-HR is an ethylene rubber based high voltage tape with excellent electrical, chemical and physical properties. WW-HR is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-HR is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-HR is an ethylene rubber based high voltage tape with excellent electrical, chemical and physical properties. WW-HR is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-HR is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-HR is an ethylene rubber based high voltage tape with excellent electrical, chemical and physical properties. WW-HR is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-HR is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-EF is a 0.125in. (3.2mm) self-amalgamating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 volts. WWEF has superior adhesion to metals, cable insulations and jackets. It will have no adverse effects on polymeric conducting shields. WW-EF is normally wrapped with vinyl tape.

WW-FT consists of a high quality cotton cloth impregnated with a unique brown specially compounded natural rubber and synthetic rubber blend adhesive which provides for superior adhesion to all types of surfaces. This tape offers excellent mechanical protection against abrasion and penetration of low voltage cable, splices and wire. Suitable for temporary binding and harnessing applications.