Conduit & Fittings

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity, excellent tensile strength
• Highly resistant to UV, abrasion and corrosion, flame-retardant

WW-HR is an ethylene rubber based high voltage tape with excellent electrical, chemical and physical properties. WW-HR is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-HR is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

• Forms a tough, flexible coating on metal, rubber and plastic to help waterproof connections
• Quick drying formula
• Excellent for hard to tape places
• Absorbs vibrations which prevents terminal screws from loosening
• Stays clean and neat
• Will not crack or unravel
• Can also be used as a thread locker or gasket sealer
• Applicator brush included
• Can be used in automotive, marine, heavy-duty, RV, industrial and  electrical applications
• 118mL (4 fl oz.) can

WW-RS is a general-purpose ethylene rubber based tape with excellent electrical. WW-RS is a self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-RS is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

WW-HRL is a 30 mil (0.76mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. WW-HRL amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing.

WW-DC is designed for use in the data communications industry with superior adhesion and elasticity. WW-DC is a vinyl electrical tape ideal for splicing, wrapping, and insulating applications.

WW-HR is an ethylene rubber based high voltage tape with excellent electrical, chemical and physical properties. WW-HR is a linerless, self-bonding tape that permits much quicker taping speeds than a tape with a liner and yields a uniform, void-free build-up. WW-HR is compatible with all extruded cable insulations and is specially formulated to have excellent thermal conductivity that will allow the heat to dissipate from a joint.

High quality PVC Electrical Tape is CSA approved/UL listed. Suitable for use attemperatures between -10°C & 80°C, and applications of up to 600 Volts.

• Used for marking, identifying, wire harnessing and insulating up to 600V
• Used for jacketing on high voltage splices
• All weather performance, high tensile strength
• Resistant to UV, abrasion and corrosion, flame-retardant

List price is for whole pack of 10 pieces.

WW-FT consists of a high quality cotton cloth impregnated with a unique brown specially compounded natural rubber and synthetic rubber blend adhesive which provides for superior adhesion to all types of surfaces. This tape offers excellent mechanical protection against abrasion and penetration of low voltage cable, splices and wire. Suitable for temporary binding and harnessing applications.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

• 600 Volt rating
• Flame Retardant
• Weather-Resistant
• Can be used as primary insulation at not more than 600 Volts
• Lead-free • Temperature rating: -18°C to 105°C (0°F to 221°F)
• Easily applied at low temperatures • Highly elastic
• Dimensions (Length x Width x Thickness): 20m x 19mm x .18mm (66' x 3/4" x .007")
• CSA Approved/UL Listed

WW-HRL is a 30 mil (0.76mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. WW-HRL amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing.

General Purpose Electrical Tape Black, 3/4" X 60 Ft, Vinyl 7mil, 600v, -7c to 80c, UL CSA