Conduit & Fittings

Plastic In-Use Weatherproof Covers are easy to install and include a gasket, mounting screws, base, cover assembly and inserts to meet the needs of a variety of applications.

Intermatic in-use plastic weatherproof covers offer long-lasting protection in all types of rugged applications: industrial, commercial, manufacturing, residential and more! The heavy-duty polycarbonate construction ensures long-lasting durability. They come in a variety of sizes, both single and double gang, and a wide range of color options.

RAB Design - Die cast aluminum cover with 1/2″ openings -  2 brass screws and neoprene gasket

RAB Design - Die cast zinc cover with cork gasket and 3/4″ hole

RAB Design - Die cast aluminum with three 1/2″ openings - 1 close-out plug, neoprene gasket and screws

RAB Design - Die cast aluminum cover with three 1/2″ openings - 2 brass screws, neoprene gasket and one plug installed in center hol

RAB Design - 4″ die cast Zinc cover with cork gasket

RAB Design - Aluminum rectangular cover plate with 1/2″ entries - Comes complete with gasket and one plug

RAB Design - 4″ die cast Zinc cover with cork gasket and one plug

RAB Design - Precision die cast zinc, 4″ diameter box comes with two opposing mounting feet - There are 4 internal posts for mounting covers 90 degrees apart. Two additional posts at 180 degrees apart for universal cross bars. One post for ground wire screw plus all posts are 10-24 tapped - Five conduit entries, four on the side and one on the bottom - Each unit comes complete with cork gasket, zinc plated screws, 3 threaded plugs to match side entries, stamped cover and one ground screw packaged inside the unit

RAB Design - Precision die cast aluminum, 4″ diameter box comes with two opposing mounting feet - There are 4 internal posts for mounting covers 90 degrees apart. Two additional posts at 180 degrees apart for universal cross bars. One post for ground wire screw plus all posts are 10-24 tapped - Five conduit entries, four on the side and one on the bottom - Each unit comes complete with neoprene gasket, 4 threaded plugs to match side entries, stamped aluminum cover with brass screws and one ground screw installed

The 5613 box is a 1/2″ One Gang Rectangular Zinc Box with 3 conduit entries. Comes with one green galvanized metal screw and two spare plugs, completed with a raw zinc finish.

RAB Design - Precision die cast zinc, 4″ diameter box comes with two opposing mounting feet - There are 4 internal posts for mounting covers 90 degrees apart. Two additional posts at 180 degrees apart for universal cross bars. One post for ground wire screw plus all posts are 10-24 tapped - Five conduit entries, four on the side and one on the bottom - Each unit comes complete with cork gasket, zinc plated screws, 3 threaded plugs to match side entries, stamped cover and one ground screw packaged inside the unit

OUELLET OVS-BS-BZ - Surface Mounting Box - Bronze

Venture Lighting VBDR-D-3L-UNV-C&W-BZ - LED Bollards - Round Dome Top Type - 14W/18W/24W - 120-277V - 3000K/4000K/5000K - 3000 Lumens - Bronze - 80 CRI - 0-10V DC dimming

The DPP pole is available from 8 feet up to 14 feet in height. The DPP pole can be used for any of the globe assemblies and the following fixtures; Gamma, Torchlite, Colonial series, BLV series, and the Coachman. Ideal for use in small courtyards, condominiums, and apartment buildings.

 RAB Design - Bollards - 25 Watt - 120 - 277 Volt - 5000K Daylight - Bronze Finish - 1900 Lumens - 76 Lumens Per Watt - Type 5 Beam Pattern - 180 DEGREE CUTOFF - 100,000 Hours Lifes

LED Bollard Flat Top Light - 42 Inch Base - AC120-347V - 8/15/20/25W - 3000/4000/5000K Selectable - 1080/2025/2700/3375LM - Bronze Finish - 70+ CRI - IP65 - Die-Cast Aluminum Housing