Conduit & Fittings

8 Watt - LED Retrofit Kit - 3000K Warm White - Medium base - 120 V - ANSI E26

* This item has been discontinued and is replaced by its upgraded version S11800R1. Please refer to the link below for your reference

https://www.bulbspro.com/s11800r1.html

Satco S9729 - 7.5 Watt - LED Downlight Retrofit - 4" Baffle - 3000K Warm White - Miniature 2 Pin Round base - 90 Deg. Beam spread - 12 Volt - Dimmable - 460 Lumens - 50W Incandescent Equivalent

List Price is for Whole Pack of 12 Pieces of S9729

Satco S9055 - 8.5 Watt - Retrofit LED - 2700K Warm White - 500 Lumens - Connector or Adapter - Frosted - 100 Deg. Beam Spread - 120V

* This item has been discontinued and is replaced by its upgraded version S39055. Please refer to the link below for your reference

https://www.bulbspro.com/s39055.html

TCP’s Dimmable Edge-Lit Downlights are the perfect choice for remodeling or new construction projects. The slim, energyefficient design is easy to install and offers a rated lifetime of 40,000 hours.

List Price is for Whole Case of 6 Packs

Satco S9056 - 8.5 Watt - Retrofit LED - 3000K Warm White - 500 Lumens - Connector or Adapter - Frosted - 100 Deg. Beam Spread - 120V

Satco S29056 - 4" LED Direct Wire Edge-Lit Downlight - 8.5Watt - 120Volt - 3000K Warm White - Dimmable - 500 Lumens - 40000 Average Rated Hours - 83 CRI - 100 Deg. Beam Spread - 45W Incandescent Equivalent

8 Watt - LED Downlight Retrofit - 3000K Warm White - 12V - 463 Initial Lumens - 90 CRI - 90Deg. Beam Spread - Dimmable - Frosted Finish - 35000 Average Rated Hours

7 Watt - LED Downlight Retrofit - 3000K Warm White - 12V - 401 Initial Lumens - 90 CRI - 90Deg. Beam Spread - 50W Incandescent Equivalent - Dimmable - Frosted Finish - 35000 Average Rated Hours

7 Watt - LED Directional Downlight Retrofit - 3000K Warm White - 12V - 432 Initial Lumens - 90 CRI - 90Deg. Beam Spread - Dimmable - Frosted Finish - 35000 Average Rated Hours

36° Beam with 20° tilt and 360° rotation - 1-3/4" Deep - 90+ CRI - 0.95 Power Factor - Insulated Ceiling & Wet Locations - IP 54 - Air Tight

36° Beam with 20° tilt and 360° rotation - 90+ CRI - 0.95 Power Factor - IP 54 - Air Tight - Cut Hole In Ceiling And Snap Fixture In Opening with Attached Spring Clips - 1-1/2" with Driver Remotely Installed

36° Beam with 20° tilt and 360° rotation - 1-3/4" Deep - 90+ CRI - 0.95 Power Factor - Insulated Ceiling & Wet Locations - IP 54 - Air Tight - Applications: Cabinets, Recessed Alcoves, Slopped Ceilings

36° Beam with 20° tilt and 360° rotation - 90+ CRI - 0.95 Power Factor - IP 54 - Air Tight - Cut Hole In Ceiling And Snap Fixture In Opening with Attached Spring Clips - 1-1/2" with Driver Remotely Installed

36° Beam with 20° tilt and 360° rotation - 1-3/4" Deep - 90+ CRI - 0.95 Power Factor - Insulated Ceiling & Wet Locations - IP 54 - Air Tight

36° Beam with 20° tilt and 360° rotation - 1-3/4" Deep - 90+ CRI - 0.95 Power Factor - Insulated Ceiling & Wet Locations - IP 54 - Air Tight - Applications: Cabinets, Recessed Alcoves, Slopped Ceilings