Conduit & Fittings

 The wall or post mount outdoor grey 100W metal halide area security light is ideal for yards and lots, service roads and building perimeters. The fixture includes a photocell for dusk to dawn operation. The prismatic refractor provides uniform symmetrical Type V distribution.             

Philips 157326 - Master Cosmo White CPO-TW 140 Watt 2800K PGZ12 Base - Universal Buring - CPO-TW 140W/728 PGZ12

*******Use only with electronic control gear,

*******Use only in totally enclosed luminaire, even during testing

Philips 157319 - Master Cosmo White CPO-TW 60 Watt 2800K PGZ12 Base - Universal Buring - CPO-TW 60W/728 PGZ12

*******Use only with electronic control gear

*******Use only in totally enclosed luminaire, even during testing

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

Venture Tri-Tap Ballast 120/277/347V for Pulse Start Metal Halide Lamp 150 W ANSI#M102, Capacitor16.0 uF 330V, No Ignitor

* This is a discontinued model, please refer to the link below for the replacement we suggested

https://www.bulbspro.com/v90j7110k.html

Philips Advance IMH39ABLSID - Electronic Ballast For 39W Metal Halide Lamps With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code M130 Minimum Starting Temp -20°C/-5°F.

* Ballast will not Operate if Insulation Detector is Absent or Shorted.

Venture Circuit Type Ballast 120/277/347V for Pulse Start Metal Halide Lamp 250 W ANSI M153

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/emcaftj251.html

Universal Lighting M15012-27CK-5EU-F, For 1 x 150W Metal Halide Lamp - Electronic Metal Halide Ballast - Operates M/C102/E, M/C142/E Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

Philips Advance IMH39GLFM - Electronic Ballast For 39W Metal Halide Lamps With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C130/M130 Minimum Starting Temp -20°C/-4°F

Top Lead Exit, Mounted by Stud. Pulse Start Ignition 120-277V, Line Voltage Must be Reset after Abnormal Operation Shutdown Circuit.

RAB Design TL-175-MH 120V BLACK - Post Top Lighting - 120 Volt - 175 Watt - Metal Halide - Black Finish

400 Watt Pulse Start Metal Halide - 26000 hours Life - 4000K - T15 Clear - Mogul Base - ANSI M135, M155/E - Horizontal ±75° Burning Position - Venture MS400W/H75/T15/S/PS/740

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/50268.html

RAB Design SCF-100-MH 120V BLACK - Post Top Lighting Fixture - Small Colonial SCF - 120 Volt - 100 Watt - Black Finish - Metal Halide

Venture Tri-Tap Ballast 120/277/347V for Pulse Start Metal Halide Lamp 100 W ANSI#M90, Capacitor12.0 uF 330V, No Ignitor

Venture Circuit Type Ballast 120/277/347V for Pulse Start Metal Halide Lamp 70 W ANSI M98

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/emzaftj70.html

Universal Lighting Part No. 188611 M2012/27CK-5EU-JT3 for one (1) 20W M156/C156 - Electronic MH Ballast - 120-277 Volts - Power Factor: >95% - Ballast Factor: 1.00

* This item has been discontinued and we will dispatch the Hatch brand MC20-1J0UNNU instead. Please refer to the attached specification sheet for the replacement we suggested 

100 Watt - Pulse Start Metal Halide - 40000 Hours Life - 4000K - ED28 Clear - Mogul EX39 Base - ANSI M90/O - Universal Burning Position - Venture MPL 100W/U/ED28/PS/740

M144 450W CWA 120/208/240/277 Pulse Start Core & Coil Ballast - For One 450 Watt Metal Halide Lamp