Conduit & Fittings

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, High Range Input Voltage 347 – 480 Vac, Constant Current LED Driver.

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/xh150c070v210fnf1m.html

Output Voltage 50V - 143V, Output Current 105mA - 1050mA, Max Output Power 150Watt, Analog 0 to 10 vDC Voltage Dimming to 10% with Tuning Interface, High Input Voltage120 - 277Vac, Constant Current LED Driver, Bottom Lead Exit with Studs

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Max. Output Power: 150W, Input Voltage: 347-480V, Output Current: 530mA, Output Voltage: 90-280V, Min. Power Factor: 0.9, IP rating: IP66, Isolation: Class 1, Dimming Method: 0-10V, Dimming Range (%): 100% ~ 10%

Output Voltage 99V - 285V, Output Current 53ma - 530mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, High Range Input Voltage 347 – 480 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

SoliDrive - Electronic Constant Voltage - Output 12V - 0-10V Dimmable LED Driver - 150W Max Output Power - Input 120-277VAC - 3-Channel Surface / Recessed Junction Boxes - White / Black
 

120-277V AC Input Voltage - Short Circuit & Overload Protection - 50 / 60Hz Input Frequency - Constant Voltage Output Mode - 194°F / 90°C Max. Case Temperature - 150W - 4.1A - 36V DC

150W 12VAC Outdoor Magnetic Lighting Transformer - Input 277VAC - Phase-Cut Dimmable - Nema 3R - Indoor & Outdoor

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

150W 24VDC 6.25A Output LED Driver, High Power Non-Dimmable, 100-277V Wide Range Input, Power Factor 0.95. (3) x 1/2" KO (Knockout) at Each End. Suitable for Use in Dry, Damp and Wet Locations. cULus Listed, Class P

150W 12VDC 12.5A Output LED Driver, High Power Non-Dimmable, 100-277V Wide Range Input, Power Factor 0.95. (3) x 1/2" KO (Knockout) at Each End. Suitable for Use in Dry, Damp and Wet Locations. cULus Listed, Class P

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

150W 12VAC Outdoor Magnetic Lighting Transformer - Phase-Cut Dimmable - Nema 3R - Indoor & Outdoor

150W 24VAC Outdoor Magnetic Lighting Transformer - Phase-Cut Dimmable - Nema 3R - Indoor & Outdoor - Input 277VAC

SoliDrive - Electronic Constant Voltage - Output 12V - Non-Dimmable LED Driver - 150W Max Output Power - Input 120-277VAC - 3-Channel Surface / Recessed Junction Boxes - White / Black
 

150W 24VAC Outdoor Magnetic Lighting Transformer - Phase-Cut Dimmable - Nema 3R - Indoor & Outdoor