Conduit & Fittings

SmartMate Electronic Programmed Start 4-Pin CFL Ballasts . For (1) x CFQ13W/G24Q, CFS10W/GR10Q, CFS16W/GR10q,CFTR13W/GX24Q, (2) x CFQ13W/G24q, CFS10W/GR10Q, CFTR13W/GX24Q. 120-277V,50/60 HZ. Series Lamp Connection.

Triad C213UNVSV3ME – SuperDim Series Programmed Rapid Start - 120/277V- Ballast Factor 1.0 - Power Factor >0.98 - Min. Temp. Rating 0 Deg. F

ULTRASAVE Lamp Type CFL 26W - Series Lamp Connection -  50/60 Hz Input Frequency - 10 ft Maximum Remote Mounting - Sound Rating A - 70°C Max. Case Temperature

SmartMate Electronic Programmed Start 4-Pin CFL Ballasts . For (1) x CFQ13W/G24Q, CFS10W/GR10Q, CFS16W/GR10q, (2) x CFQ13W/G24q, CFS10W/GR10Q . 120-277V,50/60 HZ. Series Lamp Connection.

GE Lighting 63091 - GEC213-MVPS-BES - GE Multi-Volt Proline CFL Program Start Electronic Ballast - For (2/1) CFL 13W 4Pin - 120-277V 50/60Hz - Bottom Exit with Mounting Studs

Constant Voltage Design, 100-130VAC 50/60Hz Input, 12VDC 2.5A Output, IP66 for Indoor/Outdoor LED Lighting, Class 2 LED Power Supply. Suitable for indoor use or outdoor use without direct sunlight exposure or immerse in the water over 30 minutes.

* This item has been discontinued. Please refer to the link below for the replacement Meanwell LPV-35-12 we suggested

https://www.bulbspro.com/lpv-35-12.html

Constant Voltage Design, 90-264VAC 0.40A 50/60Hz Input, 12VDC 2.1A Output, IP42 for Indoor LED Lighting, Class 2 LED Power Supply, Suitable for use in Dry and Damp Locations.

The CDC driver is a full solution supporting forward & reverse phase dimming, ELV, TRIAC as well as 0-10V dimming types. The CDC driver is a 24V dimmable electronic LED hardwire box with 30W, 60W and 96W options for maintaining constant voltage.

LED Driver / Switching Power Supply - AC / DC Adapter - Input 120V-240VAC, 1.0Amp 50/60Hz - Output DC 12 Volt, 2 Amp - Model# RAS-1202000

This General Purpose AD/DC Transformer includes Direct 2 Pin Plug and 48" DC Power Cord with Male Plug.

It is suitable for the Flexi-LED strips. It can be connected with the LED Strip Instantly and easily. Class 2 Power Supply with no hassle during ESA inspection.

The UCT-LED24 is a 24w desktop driver for use with LED puck lights, LED strip and tape for under cabinet and cove lighting requirements.

LED-DVR-24V-24W is a class 2, constant voltage, 24V, 24W (max.) LED plug-in driver (power supply) for use with 24V LED fixtures. Driver is suitable for dry location use only.