Conduit & Fittings

Philips Advance 71A7971001D - High Pressure Sodium - C & C Ballasts - 70W - S62 ANSI Code - 120/208/240/277V - 90% Power Fact - HX-HPF Circuit Type - 2 Feet Ballast to Lamp Distance - 105°C Temp Rating

Philips Advance 72C52C2NP - Metal Halide - F-Can Ballasts - 70W - M98/143 - 120/347V - 20 Feet Ballast to Lamp Distance - 90°C Temp Rating - 90% Power Fact - HX-HPF Circuit Type - The Capacitor & Ignitor Are Included As Part Of The Potted Assembly

Universal Lighting M7012-27CK-5EU - 70 Watt - VS Electronic MH Ballast - No Feet - Side Lead Exit - Input Voltage 120-277V

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

ANSI M139 - 120/277/347V - Power Factor 90% - Maxmum Temperature Rating 105°C - For use with 70W Lamps

Venture Tri-Tap Ballast 120/277/347V for Pulse Start Metal Halide Lamp 70W ANSI#M98, Capacitor 8.0 uF 280V, No Ignitor

M98 70W HX-HPF 120/277/347 Core & Coil Ballast - For One 70 Watt Metal Halide Lamp

Philips Advance e-Vision 70W - Electronic Metal Halide Ballast - Operates M/C98, M/C139,M/C143 Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

Philips Advance 71A7907001DB - High Pressure Sodium - C & C Ballasts - 70W - S62 ANSI Code - 120V - 90% Power Fact - R-HPF Circuit Type - 2 Feet Ballast to Lamp Distance - 105°C Temp Rating

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/esrn00f70ia.html

Philips Advance 71A5292001D - Metal Halide Ballasts - 70 Watt - M98/143 - 120/208/240/ 277V - 90% Power Fact

IMH-70-GBLS e-Vision Electronic Ballast for 70W Metal Halide Lamps, ANSI M98, M143 (Medium Base), M139 (Philips T-6, CDM-T, –TD 70), 120-277V 50/60Hz. Smaller Metal Case, Bottom Leads with Studs

Philips Advance IMH70ELFM - Electronic Ballast For 70W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - Leads Exit Either End - 120-277V - ANSI Code C98/M98 - C139/M139 or M143 Minimum Starting Temp -20°C/-4°F

PowerSelect Inc Model PS13U70L, Electronic Ballast For One 70W Metal Halide Lamp with Side Exit Leads, Keyhole Mounting Bracket is Extenedable when Mounting in a Pole Application, 120-277V, ANSI Code CM85, M98, M139, M143, Maximum Distance from Ballast 2.5M or 10Feet, Operating Temperature -30C to 90C.

No need to assemble this transformer within a housing! Easily mounted outside through a simple standard 1/2" knock-out in a junction box or through an approx. 5/8" hole in any other enclosure. Secured at the inside of the enclosure by a standard 1/2" NPT metal conduit fitting locknut (provided).

Stepdown transformers and autotransformers are used when you need to connect a lower voltage device to a higher voltage source. This step-down transformer can be used with Xitanium Intellivolt LED Drivers.

Unique form factor, low height, narrow width, Slim-Line Step Down Autotransformer - 480V down to 240V - 75VA

No need to assemble this transformer within a housing! Easily mounted outside through a simple standard 1/2" knock-out in a junction box or through an approx. 5/8" hole in any other enclosure. Secured at the inside of the enclosure by a standard 1/2" NPT metal conduit fitting locknut (provided).