Conduit & Fittings

The HWB-DIM-MDC-24V-96W is a compact magnetic driver equipped with two auto-reset breakers which protect both the load and the driver. All encased in a coated metal box that includes 2 knockouts to enable easy installation.

Class 2, Dimmable with any standard MLV TRIAC dimmer, Auto-reset circuit breakers, ETL listed, Certified to CSA Standard, Commercial and Residential Use

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, Class 2, ETL Listed, Certified to CSA Standard

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

The HWB-DIM-MDC-24V-192W is a compact magnetic driver equipped with two auto-reset breakers which protect both the load and the driver. All encased in a coated metal box that includes 2 knockouts to enable easy installation.

Class 2, Dimmable with any standard MLV TRIAC dimmer, Auto-reset circuit breakers, ETL listed, Certified to CSA Standard, Commercial and Residential Use

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/m96l24dc-ar.html

Dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch, Super compact ALUMINUM CASE, Class 2, IP67 – Withstands wet and salty conditions.

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Low operating temperature, Optional 10% voltage boost to compensate for voltage drop.

Class 2, Dimmable with any standard MLV TRIAC dimmer, Auto-reset circuit breakers, ETL listed, Certified to CSA Standard, Commercial and Residential Use

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

Triad C340SI120RH - Parallel Instant Start Electronic Ballast - 120V- Ballast Factor 0.88 - Power Factor >0.90 - Min. Temp. Rating 50 Deg. F (10 C) for 3 or 2 Lamps FT40W/2G11 Lamps and PL-L40W/2G11 lamps

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/icn3ttp40sc35m.html

Fulham LongHorse 6 LH6-120-L - (4) Lamp - 120 Volt - Instant Start - 0.87 Ballast Factor - Maximum Power 140 Watt

Fulham LongHorse 5 Ballast - LH5-120-L - (4) Lamp - 120 Volt - Instant Start - 0.87 Ballast Factor - Maximum Power 128 Watt

Philips Advance MARK 10 POWERLINE Line Voltage Dimming Ballast, Input Voltage 120V, 60Hz, Used for 2 x F54T5HO, FC12T5HO, FT55W/2G11 Lamps. No Wire Coming with Ballast, Plug-In Terminals Connection.

For (3) x F17T8, F25T8, F32T8 Fluorescent Lamp. Advance Mark 10 PowerLine Electronic Dimming, Programmed Start, 120V 60Hz Input,

Fulham Fluorescent Ballast - WorkHorse 5 - WH5-120-L - (4) Lamp - 120 Volt - Instant Start - 0.87 Ballast Factor