Conduit & Fittings

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Provide automatic control for pumps, cleaners and other types of loads - Quick connect terminals for easy installation - Timers have three-way mounting; flush in round opening, raised in rectangular opening or on base - Black housing with white screening and orange trippers - 8 oz (0.22 kg) All mechanisms are shipped in bulk (36 per carton) unless otherwise specified

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Includes P1353ME For a pool/spa combo Load center with four position 60 Amp breaker base Two knockouts for GFCIs and switches Controls 5 circuits Full thermostat control Operates single, two, and variable-speed pumps 24-hour scheduling capability for all connected equipment Type 3R indoor/outdoor 0.048" steel load center

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 60-Amps, 120, 240 VAC or 120, 208 VAC single phase

Load center with four position 60 Amp breaker base. - Two knockouts for GFCIs and switches. - Controls 5 circuits. - Full thermostat control. - Operates single, two, and variable-speed pumps.

ONE EMPTY 16.5 X 10 X 4.75 IN. PE OUTDOOR ENCLOSURE WITH 60 AMP BUS

The Intermatic PE20065RC is a 60 Amp pool and spa control system with type 3R load center. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE20065RC with included radio control and make it a fully operative system.

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

Includes P1353ME and a radio remote control Multi-voltage input and output Controls single and two-speed pumps and cleaner/booster pumps Three ON/OFF events per circuit per day Seven pre-programmed modes Freeze and heater protection Replaces 3 mechanical timers all-in-one Countdown and override features enable programs to be overridden and automatically resumed without requiring the user to reprogram the system Fireman's switch connection

This inerratic 3 circuit switch is for 1 and 2 speed pumps. It can control up to 3 circuit and 3 ON/OFF events per day. There are 7 pre-programmed combinations to choose from.

For 1 and 2-speed pumps;Controls 3 circuits;3 ON/OFF events per day;7 pre-programmed combinations to choose from;Add on other pool/spa related devices

The Intermatic PC1120 is a onechannel light controller with a single channel switch from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

Automated control for pumps, cleaners, and other types of loads 3 different mounting methods Quick connect terminals for easy installation

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

24-Hour model Perfect for applications where equipment needs to be cycled ON/OFF up to 8 times per day Select feature enables timers to be continuously ON, OFF, or in AUTO mode Rugged construction 3-year service life replaceable lithium battery

To relocate the antenna and ensure communication between the Hand-Held and control center - Can be used with the Intermatic PE650 - Can be used with the Intermatic PE953 - Can be used with the Intermatic PA122 - Ensuring that communication between the Hand-Held unit and the control center is successful.

This Intermatic digital timer allows you to add automated timed control of your freeze protection controller for increased versatility and convenience. This timer works in unison with the freeze protection controller to ensure that your pool or spa are safe from the danger of freezing over.