Conduit & Fittings

Easily snap into most existing Inerratic enclosures with available mechanism support bracket - Controls up to three valve actuators - Switches heater and thermostat HIGH/LOW - Remote control capabilities - Mechanism only, type 3R enclosure not included

These Air Switches are designed to control one piece of equipment with one air button. The switch can safely control loads without electricity at the pool, spa or tub side, such as a pump, blower or light. Each time pressure is applied to the remote air button the connected equipment will operate as described in the table. 

To relocate the antenna and ensure communication between the Hand-Held and control center - Can be used with the Intermatic PE650 - Can be used with the Intermatic PE953 - Can be used with the Intermatic PA122 - Ensuring that communication between the Hand-Held unit and the control center is successful.

Use the Intermatic RC6F Universal Air Switch Button as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, air blower, heater, or light can be turned on or off from the side of the pool without risk of electric shock. The tubing is run from the air button to the air control. When the air button is pushed, a blast of air travels through the tubing and engages the air control. 

The Intermatic 119T86A is a 120 volt transformer. This model is designed for use with T8845PV sprinkler and irrigation time switch. It features a metal surge strip with 6 outlets.

Use the Intermatic RC122B Air Switch Button and Tubing for Gunite Spas as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, air blower, heater, or light can be turned on or off from the side of the pool without risk of electric shock. The tubing is run from the air button to the air control. When the air button is pushed, a blast of air travels through the tubing and engages the air control. 

The Intermatic 119T340 is a 300 watt transformer. This model is designed to supply 12 volts to outdoor garden lights, submersible fixtures and spa or pool lights. It features the builtin circuit protection which disconnects the power in case of overload or defect. The Intermatic 119T340 offers you years of safe and efficient operation.

Use the Intermatic RC510 Air Switch Tubing Coupler as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, air blower, heater, or light can be turned on or off from the side of the pool without risk of electric shock. The tubing is run from the air button to the air control. When the air button is pushed, a blast of air travels through the tubing and engages the air control. 

Use the Intermatic RC150 Air Switch Tubing Kit as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, blower, or light can be turned on or off from the side of the pool without risk of electric shock.

Tubing is run from the air button to the air control. When the air button is pushed a blast of air travels through the tubing and engages the air control.

The Intermatic RC127B is an air switch button and 75 ft. tubing for Gunite spas. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button without risk of electric shock. You can increase safety by controlling spa applications with the Intermatic RC127B. This model is also approved by CSA/CUS.

Intermatic 21T166A - Spacer-Standoff - 3" long - 2 pack

List Price is for Whole Pack of 2 Pieces

The sensor is designed to protect the pool and spa equipment and plumbing against freeze damage. The sensor plugs into the circuit board on the back of the P1353ME and turns ON the filter pump when air temperature drops below the programmed temperature. The freeze programming mode will not appear unless the sensor is plugged into the clock.

Intermatic 178T24 THERMOSTAT FOR FP1102T/PF1103T

Intermatic PA120 Timer DPST Relay w/ 24V AC Coil

The Intermatic 21T156A is a pack of 4 standoff posts. These posts are designed for mounting wiring devices. With the help of Intermatic 21T156A, the toggle switches are mounted inside Intermatic control panels or pool/spa control centers.

The Intermatic PA117 is a replacement latch kit. It is designed for Intermatic T10000R, T10004R, T10101R, T10404R, T10604R, and T12404R models.

This switch provides coordinated control for any pool/spa heater and any filter pump. It is designed to turn OFF a gas fired pool/spa heater approximately 20 minutes before the filter pump shuts down. This eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater.

Replacement thermostat relay assembly for PF1202T & PF1222TB