Conduit & Fittings

140W LED retrofit lamp to replace MH and HPS lamps up to 400w, EX39 Mogul base (will operate in both EX39 and E39 sockets). Down pointed LED’s only. UL listed approved for damp environments & open or fully enclosed fixtures. Retrofitted fixture retains UL approval under UL Classified 1598C.

Universal Lighting M15012-27CK-5EU-F, For 1 x 150W Metal Halide Lamp - Electronic Metal Halide Ballast - Operates M/C102/E, M/C142/E Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

Equivalent up to 400 Watt Metal Halide Flood Light. Ideal for building facades, sing lighting and wall washing. NEMA 3H X 3V Narrow Beam Distribution , Yoke mount - 4.53” Yoke with watertight connector.

The WPTL-L is a highly efficient LED wall mount luminaire. This fixture is supplied with a wall bracket (for surface mounting only). Other options include: a wiring box (for feed trough mounting), a trunion (for flood mounting) or a slipfitter (for area lighting).

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, Universal Input Voltage 120-277 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

* This item has been discontinued. Please refer to the link below for the replacement we suggested 

https://www.bulbspro.com/ledinta0700c210do.html

RAB Design BUFFALO-LED130-B-57K-50DEG - LED Highbay - 130W - 120-277V - min 14000 lumens - 5700K Daylight - 50 Deg. Beam Aangle

Standard case - electronic low frequency square wave ballast for 150W metal halide lamps with 120V "tap" for 3 or 4-wire self heating thermal protectors (IDTPs). Top Lead Exit, Mounted by Stud. Pulse Start Ignition 120-277V, Line Voltage Must be Reset after Abnormal Operation Shutdown Circuit.

150W LED retrofit design replaces MH and HPS lamps up to 400w. Design features both down and side mounted LEDs delivering a wide, uniform light distribution. Suitable for fully enclosed high bay, low bay, canopy and other area fixtures.  UL1598C classification maintains modified fixture UL certification.

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/led-8232m40.html

100 watt LED Grow Light with a full spectrum, emphasizing the Blue and Red wavelengths. This lamp can be used as a primary or supplemental light source for almost any type of indoor growing. The light output has a very wide angle. It will provide the greatest benefit when mounted relatively close to the plants. Generally, this light can replace up to a 200 watt HPS lamp or up to 250 watt Incandescent lamp. 

200Watt, 120-277VAC 50/60Hz, 17000Lumens, Aluminum Main Structure + Tempered Glass, 5000K Daylight Color Temperature. Excellent For Cold Weather Applications. No UV or IR Radiation. Extensive Range of Applications.

Stanpro - LED High Bay - 24,000 Lumens - 200 Watt - 4000K Cool White - 0-10V Dimmable - RI >80

Output Voltage 50V - 143V, Output Current 105mA - 1050mA, Max Output Power 150Watt, Analog 0 to 10 vDC Voltage Dimming to 10% with Tuning Interface, High Input Voltage120 - 277Vac, Constant Current LED Driver, Bottom Lead Exit with Studs

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, Universal Input Voltage 120-277 Vac, Constant Current LED Driver

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/d700c150uvt-f.html

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

1-2 Lamp - 120/277 volt - Universal Voltage - T5 - Quicktronic - PROStart - High Efficiency - Programmed Rapid Start - High Output - Hi-Temp - Electronic | Sylvania Fluorescent Ballast

* This item has been discontinued. Please refer to the link below for the replacement - the Philips brand ICN-2S54-90CN-35M we suggested 

https://www.bulbspro.com/icn2s5490cn35m.html

The WPTL-L is a highly efficient LED wall mount luminaire. This fixture is supplied with a wall bracket (for surface mounting only). Other options include: a wiring box (for feed trough mounting), a trunion (for flood mounting) or a slipfitter (for area lighting).

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, Universal Input Voltage 120-277 Vac, Constant Current LED Driver. Enclosure Case Bottom Lead Exit with Studs

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

RAB Design BUFFALO-LED130-B-57K-80DEG - LED Highbay - 130W - 120-277V - min 14000 lumens - 5700K Daylight - 80 Deg. Beam Aangle