Conduit & Fittings

The ELM4L from Lithonia Lighting® is an aesthetically pleasing emergency LED light fixture. It provides a minimum of 90 minutes of illumination when there is a loss of power. Equipped with four high performance LEDs and full range swivel lamp heads it is ideal for a wide-range of mounting height applications (from 7.5' to 24'), requiring aim-able optics. The linear pattern provides wide uniform distributions that deliver broad spacing up to 67' and low max to min ratios that far exceed code requirements.

60W LED retrofit design (LED-8025 with up lighting. Replaces MH and HPS lamps up to 175w. Design features both down and side mounted LEDs delivering a wide, uniform light distribution. Suitable for fully enclosed garage, low bay and other area fixtures. 60W power consumption

Lithonia Lighting TWR1 100S 120/347 LPI CSA - Small Glass Refractor Wall Pack - 100W High Pressure Sodium - 120/347V - Lamp Installed - CSA

Lithonia Lighting TWH 400S 120/347 LPI CSA - Glass Refractor Wall-Pack - 400W High Pressure Sodium - 120/347V - 50,000 Lumens - Magnetic Ballast - Dark bronze - Lamp Included - CSA

Edisono base Hi Power 50W LED Retrofit designed for Shoe Box/ Wall Pack/Roadway HID fixtures. Compact design will fit into most HID fixtures without modifying existing reflector. Type V, general distribution optics only. 48 CREE LED's. 50W LED model can replace up to a 175W MH/HPS lamp., 50,000 hour rated LED life.

The ELM6L from Lithonia Lighting is an aesthetically pleasing emergency LED light fixture. It provides a minimum of 90 minutes of illumination with constant light output when there is a loss of power. Equipped with six high performance LEDs and full range swivel lamp heads it is ideal for a wide-range of mounting height applications (from 7.5' to 30+'), requiring aimable optics. The linear pattern provides wide uniform distributions that deliver broad spacing up to 98' and low max to min ratios that far exceed code requirements.

LED G24d BR30 Style PL Retrofit. Model LED-7306 2 pin fits either G24d-2 or G24d-3.  Replaces 26w PL fluorescents lamps in recessed can applications.  Works with magnetic ballast or direct 120-277 (USA) or 120-347V (CANADA) line voltage. G24d/q mounting integrates energy saving LED technology into a standard PL Fluorescent format. Not dimmable.

Philips Advance 71A84A3001D - High Pressure Sodium - C & C Ballasts - 400W - S51 ANSI Code - 120/277/347V -  90% Power Fact - CWA Circuit Type - 2 Feet Ballast to Lamp Distance - 105°C Temp Rating

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/e971-ftj-so400.html

Lithonia Lighting TWH 250M 120/347 LPI CSA - Glass Refractor Wall-Pack - 250W Metal Halide - 120/347V - 25000 Lumens - Magnetic Ballast - Dark bronze - Lamp Included - CSA

Automatically turn on when motion is detected, adjustable time delay: from 15 seconds to 30 minutes. Single pole, Coverage range up to 30ft mounting, 360 degrees. Input 120-347V, Load 800VA@120V, 1200VA@277V, 1500VA@347V

* This is a discontinued model, please refer to the link below for the replacement we suggested

https://www.bulbspro.com/senpir-hb-01.html

150 watt LED Grow Light with a spectrum that includes UV, Blue, Green Red and Far Red wavelengths. Generally, this light can replace a 300- 400 watt HPS lamp.

The ELM4L from Lithonia Lighting® is an aesthetically pleasing emergency LED light fixture. It provides a minimum of 90 minutes of illumination when there is a loss of power. Equipped with four high performance LEDs and full range swivel lamp heads it is ideal for a wide-range of mounting height applications (from 7.5' to 24'), requiring aim-able optics. The linear pattern provides wide uniform distributions that deliver broad spacing up to 67' and low max to min ratios that far exceed code requirements.

60W LED retrofit design (LED-8025 with up lighting. Replaces MH and HPS lamps up to 175w. Design features both down and side mounted LEDs delivering a wide, uniform light distribution. Suitable for fully enclosed garage, low bay and other area fixtures. 60W power consumption

Lithonia Lighting TWR1 70S 120/347 LPI CSA - Small Glass Refractor Wall Pack - 70W High Pressure Sodium - 120/347V - Lamp Installed - CSA

Lithonia Lighting TWH 250S 120/347 LPI CSA - Glass Refractor Wall-Pack - 250W High Pressure Sodium - 120/347V - 27500 Lumens - Magnetic Ballast - Dark bronze - Lamp Included - CSA

LED retrofit design to replace 100W MH and HPS lamps up to 100w.  Fully encapsulated, 24 watt LED with E26 Edison base. Small, compact size allows placement in smaller bollards and other HID fixtures. Suitable for fully enclosed fixtures.

* This is a discontinued model, please refer to the below suggested replacement models

1. LED-8029E40-A (120-277V)

2. LED-8029E40C-A (347V)

LED Fixture RIGID 4" Dia. Down Light, White Regressed Trim - Flexcable for Commercial Ceilings - 12W - Selectable CCT (30-35-40K) - 120-347V Auto-Sensing Driver - 0-10VDC Dimmable. Energy Star

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/rgd-cdr-4-12w-mk9-120-347v-wh-d.html

LED G24q BR30 Style PL Retrofit. Model LED-7308 4 pin fits either G24q-1, G24q-2 or G24q-3. Replaces Vertically oriented 26w PL fluorescents lamps in recessed can applications.  Works with direct 120-277 (USA) or 120-347V (CANADA) line voltage only. G24d/q mounting integrates energy saving LED technology into a standard PL Fluorescent format. Not dimmable.

Philips Lighting 473990 - LED 4 Feet T8 Tube - 120-277, 347V - 9.5W - G13 Base - 4000K Cool White - 80CRI - 1600 Lumens - Dimmable - 70000 Life Hours

List price is for whole pack of 10 pieces