Conduit & Fittings

SR Series - Electronic Constant Current Phase-Cut Dimmable LED Drivers - 8W Max Output Power - Input 12V AC/DC - Output 9-15VDC - 600 mA Output Current - Withstands dry and damp conditions

Satco S8000 - LED Emergency Driver - 5W - 120-277V - Red - 24 Hour Recharge Time - 1.8 Watt Standby Power - > 90 Minute Operation From Lithium Ion Battery - Switching Time < 1 Sec - Over-Charge / Discharge Protection - Self-Checking Function - Test Button

Max. Output Power: 4W, Input Voltage: 120-230V, Output Current: 0.35A, Output Voltage:2.8~12V, Min.Power Factor 0.5, Envir.Protection Rating: UL damp & dry

Max. Output Power: 6.5W, Input Voltage: 120-230V, Output Current: 0.70A, Output Voltage:2.8~9.3 Or 13V, Min.Power Factor 0.5, Envir.Protection Rating: UL damp & dry

Max. Output Power: 10W, Input Voltage: 120V, Output Current: 0.35A, Output Voltage: 28V, Power Factor  @ Max Load : >0.9,  Envir.Protection Rating: UL damp & dry and Type HL

Max. Output Power: 12W, Input Voltage: 120V, Output Current: 1A, Output Voltage: 12V,Min. Power Factor : 0.9,  Envir.Protection Rating: UL damp & dry

Max. Output Power: 17W, Input Voltage: 120V, Output Current: 0.7A, Output Voltage: 24V,Min. Power Factor : 0.9,  Envir.Protection Rating: UL damp & dry

* This item has been discontinued. Please refer to the link below for the replacement we suggested.

https://www.bulbspro.com/xi020c070v030rnp2.html

Max. Output Power: 17W, Input Voltage: 120V, Output Current: 0.7A, Output Voltage: 24V,Min. Power Factor : 0.9,  Envir.Protection Rating: UL damp & dry

Max. Output Power: 20W, Input Voltage: 120V, Output Current: 0.7A, Output Voltage: 28V, Min. Power Factor : 0.9,  0-10V Dimming, Envir.Protection Rating: UL damp & dry

Max. Output Power: 34W, Input Voltage: 120V, Output Current: 1.4A, Output Voltage: 24V, Min. Power Factor : 0.9, Point LED Driver,  Envir.Protection Rating: UL damp & dry

CCT Series - Electronic Constant Current Phase-Cut Dimmable LED Drivers - 120VAC Input - 13W Max Output Power - 500mA Output Current - 18-26VDC Output - IP 21 - Indoor Only - Recognized Encl. Type

The ILB CP10 A from IOTA® is a UL Listed LED emergency driver that enables LED fixtures to deliver 90 minutes of emergency illumination during a loss of normal power. The ILB CP10 A is compatible with most Class 2 LED (10-60VDC) fixture designs and will automatically sense the required forward voltage needed to operate the LED in the emergency mode. The ILB CP10 A features dual flexible conduit for running wires to the normal AC driver and to the single-piece test switch/charge indicator accessory.

In the event of a power failure, the ILB CP05 switches to the emergency mode and operates the existing fixture for 90 minutes. The unit contains a battery, charger, and converter circuit in a single can and is available in different mounting configurations for individual fixture requirements. The ILB CP05 will operate an LED array load at 5 watts with constant power at a rated output voltage of 10V-60V.

Philips Advance Xitanium LED Driver, XI020C070V030RNP2, Maximum Output 20W 0.4-0.7A, 15-30Vdc, Input 120-277Vac, LE+TE Dimmable, 400mA to 700mA via DIP switches (refer to figure & notes in the Electrical Specification section)