Conduit & Fittings

Air sealed trim design, fixed down-light. Baffled trims reduce glare, reducing eye strain. Step baffle improves dispersion of light and improves interior baffle reflection. 4" housing required, sold separately.

Air sealed trim design, fixed down-light. Baffled trims reduce glare, reducing eye strain. Step baffle improves dispersion of light and improves interior baffle reflection. 4" housing required, sold separately.

Simplicity in design allows a straight forward look while still being functionally adjustable. Rear re-lamping. Stamped metal construction. Vertically adjustable 0 degree to 35 degree; rotates 360 degree within the housing. 4" housing required, sold separately.

Simplicity in design allows a straight forward look while still being functionally adjustable. Rear re-lamping. Stamped metal construction. Vertically adjustable 0 degree to 35 degree; rotates 360 degree within the housing. 4" housing required, sold separately.

IC-rated 6-inch-aperture recessed downlighting fixture. For remodeling installations where housing will be in direct contact with ceiling insulation. Requires one 120 Volt Light Bulb with E26 Base (not included, for proper lamps, please see related products)

75W Halogen Equivalent - 110° Beam Angle - 80 CRI - 0.98 Power Factor - Insulated Ceilings, Open Plenum, Wet Locations - IP 54 - Air Tight - 1/2" Deep - Ceiling Clearance Required For Driver: 1-1/2"

75W Halogen Equivalent - 110° Beam Angle - 80 CRI - 0.98 Power Factor - Insulated Ceilings, Open Plenum, Wet Locations - IP 54 - Air Tight - 1/2" Deep - Ceiling Clearance Required For Driver: 1-1/2"

75W Halogen Equivalent - 110° Beam Angle - 80 CRI - 0.98 Power Factor - Insulated Ceilings, Open Plenum, Wet Locations - IP 54 - Air Tight - 1/2" Deep - Ceiling Clearance Required For Driver: 1-1/2"

The RTM6025 is a 6” aperture line voltage tilting round rear load metal gimbal trim. The RTM6025 is used for PAR38 lamps. The RTM6025 is available in White and Brushed Nickel.

The RTM6025 is a 6” aperture line voltage tilting round rear load metal gimbal trim. The RTM6025 is used for PAR38 lamps. The RTM6025 is available in White and Brushed Nickel.

The RTM6024 is a 6” aperture line voltage tilting round rear load metal gimbal trim. The RTM6024 is used for PAR30 lamps. The RTM6024 is available in White and Brushed Nickel.

The RTM6024 is a 6” aperture line voltage tilting round rear load metal gimbal trim. The RTM6024 is used for PAR30 lamps. The RTM6024 is available in White and Brushed Nickel.

The RTM6020S is a 6” aperture line voltage shower trim with Albalite lens and neoprene gasket, suitable for damp locations. The RTM6020S is used for A19 and medium base MR16 lamps. The RTM6020S is available in White.

The RTM6019S is a 6” aperture line voltage shower trim with drop opal lens and neoprene gasket, suitable for damp locations. The RTM6019S is used for A19 and medium base MR16 lamps. The RTM6019S is available in White.

The RTM6018S is a 6” aperture line voltage shower trim with clear Fresnel lens and neoprene gasket, suitable for damp locations. The RTM6018S is used for A19 and medium base MR16 lamps. The RTM6018S is available in White.

The RTM6034 is a 6” aperture line voltage tiltable eyeball trim with a White trim ring. The RTM6034 is used for BR30 / PAR30 lamps. The RTM6034 is available in White.

The RTM6016 is a 6” aperture line voltage one-piece open trim. The RTM6016 is used for BR40 / PAR38 lamps. The RTM6016 is available in White.