Conduit & Fittings

Rough-in plate for new construction pre-mounting of 4" recessed fixtures. Made from galvanized steel, 26" long to fit joists up to 24" apart. Fix the plate with screws (not supplied) through the mounting slots.

Rough-in plate for new construction pre-mounting of 6" recessed fixtures. Made from galvanized steel, 26" long to fit joists up to 24" apart. Fix the plate with screws (not supplied) through the mounting slots.

Rough-in plate for new construction pre-mounting for 8" slim recessed fixtures. Made from galvanized steel, 26" long to fit joists up to 24" apart. Fix the plate with screws (not supplied) through the mounting slots.

Use for remotely installing the driver at easily accessible location, or when only low voltage wiring is required in the ceiling. Easily and securely extend the low voltage cable between the fixture and driver. 40 feet maximum extension allowed. 2 pin connectors

Use for remotely installing the driver at easily accessible location, or when only low voltage wiring is required in the ceiling. Easily and securely extend the low voltage cable between the fixture and driver. 40 feet maximum extension allowed. 2 pin connectors

4" Goof Ring for covering holes up to 5-1/2", Material: Aluminum Alloy, Inside Diameter: 4-1/4", Outside Diameter: 5 3/4"

6" Goof Ring for covering holes up to 7-1/2", Material: Aluminum Alloy, Inside Diameter: 6-1/4", Outside Diameter: 7-5/8"

8" Goof Ring for covering holes up to 9-1/4", Material: Metal, Inside Diameter: 7-3/4", Outside Diameter: 9-1/2"

The P-4020 is a pre-mounting plate for use with 4" SlimLED round fixtures.

The P-4020S is a pre-mounting plate for use with 4" SlimLED Square fixtures.

The P-6020 is a pre-mounting plate for use with 6" SlimLED round fixtures.

The P-6020S is a pre-mounting plate for use with 6" SlimLED Square fixtures.

The SLM-60-FC is a 60" flexible connector to be used with the SlimLED series to extend the distance between the fi xture and the driver.

The SLM-DVR-9W is a hardwire box with a 9W LED driver. For use with 4" SlimLED fixtures.

Mounting Plate for 4" EEL UltraThin LED Pot Lighting (Including both Round and Square Style)

This extension cable is designed to be used to extend the distance between your Recessed Ultra Thin light and it's driver. It comes with preattached connectors designed to work with the connectors on your Ultra Thin lights. 

This extension cable is designed to be used to extend the distance between your Recessed Ultra Thin light and it's driver. It comes with preattached connectors designed to work with the connectors on your Ultra Thin lights. 

The P-1750 mounting plate is for use with DazzLED LED wall lights in new construction and insulated applications. Designed to perfectly position the wall lights.

The P-3510 is a pre-mounting plate for use with Sigma2 fixtures with 90mm round hole cut.