Conduit & Fittings

The HV3-TH01 is a powder-coated steel round stepped baffle trim. Simply designed to allow a clean look while still being functionally adjustable. The adjustable aiming capability of the lamp holder (35° tilt) provides versatility for a wide range of accent and task applications.

Convex contour profile is unique and sublime, simplicity in design allows a straight-forward appearance while still being functionally adjustable. Stamped metal construction. Vertically adjustable 0 degree to 30 degree; rotates 360 degree within the housing.

Circular profile with square opening. Light source is hidden up inside; cut- out gives the appearance of a sheer opening into the ceiling. Stamped metal construction. Fixed down-light. 3 1/4" housing required, sold seperately.

Side mounted hinge for directional light adjustment, allows greater aiming anangle and does not block light beam at steep aiming angles. Front re-lamping improves re-lamping convenience. Cast metal construction. Vertically adjustable 0 degrees to 50 degrees ; rotates 360 degrees within the housing.

12W - 100-135V - Dim-to-Warm - 3000K~2000K - Dimmable - Black Finish - Up to 700 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 2700K-5000K - Dimmable - Black Finish - Up to 850 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 2700K - Dimmable - Black Finish - Up to 850 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 3000K - Dimmable - Black Finish - 830 Lumens - 40° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 5000K - Dimmable - Black Finish - 885 Lumens - 40° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 2700K-5000K - Dimmable - Black Finish - Up to 850 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 3500K - Dimmable - Black Finish - 850 Lumens - 40° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 3000K-2000K - Dimmable - Black Finish - 600 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 2700K - Dimmable - Black Finish - 800 Lumens - 40° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 3000K-2000K - Dimmable - Black Finish - 660 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 4000K - Dimmable - Black Finish - 865 Lumens - 40° Beam Angle - Wet Locations / Insulated Ceilings - 90 CRI - TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 3000K-2000K - Dimmable - Black Finish - 700 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

12W - 100-135V - 2700K-5000K - Dimmable - Black Finish - Up to 850 Lumens - 38° Beam Angle - Wet Locations / Insulated Ceilings - 90+ CRI - Forward/reverse-phase TRIAC/ELV Dimming Tech - 3-5/8" (92mm) Hole Cut

The extra large trim ring is for use with Liteline round SlimLED™ fixtures, to enlarge the appearance of the trim.
The body is constructed from stamped steel for rigidity and finished with UV stabilized paint to match compatible fixtures.

Liteline SLM-PUCK-BK - Black Magnetic Faceplate and Back Plate - For use with SlimLED Pucks