Conduit & Fittings

M81/M102/M142 150W CWA 120/208/240/277 Core & Coil Ballast - For One 150 Watt Metal Halide Lamp

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/emza00w150.html

M144 450W CWA 120/208/240/277 Pulse Start Core & Coil Ballast - For One 450 Watt Metal Halide Lamp

ANSI L72 - For use with 90 Watt Low Pressure Sodium Lamp. Quand Tap - 120/208/240/277 Volt Input, Power Factor 90% - Maximum Temperature Rating 221 Degree F. - Including Dry Film Capcitor and Bracket Kit. This Ballast does not require Iginitor.

Venture Quad-Tap Ballast 120/208/240/277V for HPS/LU Lamp 200W ANSI S66

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/esiajddz150.html

M138/M153 250W CWA 120/208/240/277 Pulse Start Core & Coil Ballast - For One 250 Watt Metal Halide Lamp

Venture Quad-Tap Ballast 120/208/240/277V for Pulse Start Metal Halide Lamp 250 W ANSI M138 / M153

Philips Advance 71A6592 - 1000 Watt  M47 Metal Halide or H36 Mercury Lamp - 120/208/240/277 Volt,  2 x Advance Capacitor 48 MFD 300VAC, No Ignitor

M59/H33 400W CWA 120/208/240/277 Core & Coil Ballast - For One 400 Watt Metal Halide Lamp

Plusrite Quad Tap Ballast 120/208/240/277V for HPS 1000W ANSI#S52, Capacitor 26uF 525V, Ignitor GM303. Compatible with Any ANSI S52 1000W High Pressure Sodium Lamp

Venture Quad-Tap Ballast 120/208/240/277V for HPS/LU Lamp 400W ANSI#S51

M98 70W HX-HPF 120/208/240/277 Core & Coil Ballast - For One 70 Watt Metal Halide Lamp

M135/M155 400W CWA 120/208/240/277 Pulse Start Core & Coil Ballast - For One 400 Watt Metal Halide Lamp

Venture Quad-Tap Ballast 120/208/240/277V for Pulse Start Metal Halide Lamp 575 W ANSI M178

Venture Tri-Tap Ballast 120/208/240/277V for Metal Halide Lamp 400W ANSI#M59, Capacitor 24uF 400V, No Ignitor

M137/M152 175W CWA 120/208/240/277 Pulse Start Core & Coil Ballast - For One 175 Watt Metal Halide Lamp

Venture Quad-Tap Ballast 120/208/240/277V for Pulse Start Metal Halide Lamp 70W ANSI M98

M58/H37 250W CWA 120/208/240/277 Core & Coil Ballast - For One 250 Watt Metal Halide Lamp

* Please note the lead time for this item is around 12-14 weeks (if no further delay)

ANSI L71 - 120/208/240277 Volt - Power Factor 90% - Maxmum Temperature Rating 221 Degree F. - Including Dry Film Capacitor and Bracket Kit. This Ballast does not require Ignitor.  For use with 55 Watt (SOX55) Lamps.