Conduit & Fittings

1/15 HP - 0.77 Amps - 230 Volts - CW Rotation - 1550 RPM - 1.95" × 5/16" Shaft - 3.2'' A Dim.

230 Volts - 6,9,16 Watts - .20/.30 Amps - 1550 RPM - CW Rotation - 2.53'' A Dim.

1/15 HP - 0.77 Amps - 230 Volts - CCW Rotation - 1550 RPM - 1.95" × 5/16" Shaft - 3.2'' A Dim.

230 Volts - 50 Watts - 0.60 Amps - 1550 RPM - CCW Rotation - 2.78'' A Dim.

1/10 HP - 0.50 Amps - 230 Volts - CW Rotation - 1550 RPM - 2.60" × 5/16" Shaft - 4.4'' A Dim.

1/25 HP - 230 Voltage - 0.74 Amps - SP Type - 1/1550 RPM - 4.25'' Body - 3.3'' Frame - Sleeve Bearing - 2.5''x5/16'' Shaft

1/15 HP - 230 Volts - 1.30 Amps - SP Type - 1/1550 RPM - CW Rot. - 3.09'' Body - 5.0'' Dia - Sleeve Bearing - 2.75"×5/16'' Shaft

1/45 HP - 230 Voltage - 0.80 Amps - SP Type - 1/1550 RPM - CW Rot. - 2.72'' Body - Sleeve Bearing - 1.5"×5/16" Shaft

1/8 HP - 230 Volts - 1.90 Amps - SP Type - 1/1550 RPM - CCW Rot. - 4.25'' Body - 5.0'' Dia - Sleeve Bearing - - Cap - 3.0"×1/2" Shaft

1/15 HP - 230 Volts - 1.20 Amps - SP Type - 1/1550 RPM - CW Rot. - 3.40'' Body - 4.1'' Frame - Sleeve Bearing - 2.4" × 3/8" Shaft

9Watts - 230Volts - 0.27Amps - 1/1550 Spd/RPM - SP Type - 3.11''Body - 1/4" × 20 Hubless Shaft

9Watts - 0.30Amps - 230 Volts - CW Rot - 1550 RPM  - 2.83'' A Dim - Hubless Shaft 

• Single speed, 1550 rpm
• Rotation is determined by viewing opposite shaft end (OSE)
• Totally enclosed; Overload protected
• Permanent lubrication; Sleeve bearings
• Universal mounting; Threaded mounting holes
• Hardware included

• Single speed, 1550 rpm
• Rotation is determined by viewing opposite shaft end (OSE)
• Totally enclosed; Overload protected
• Permanent lubrication; Sleeve bearings
• Universal mounting; Threaded mounting holes
• Hardware included

16Watts - 0.5Amps - 230Volts - CCW Rot - 1550 RPM  - 3.03'' A Dim - Hubless Shaft

4Watts - 0.20Amps - 230 Volts - CW Rot - 1550 RPM  - 2.58'' A Dim - Hubless Shaft 

• Single speed, 1550 rpm
• Rotation is determined by viewing opposite shaft end (OSE)
• Totally enclosed; Overload protected
• Permanent lubrication; Sleeve bearings
• Universal mounting; Threaded mounting holes
• Hardware included

• Single speed, 1550 rpm
• Rotation is determined by viewing opposite shaft end (OSE)
• Totally enclosed; Overload protected
• Permanent lubrication; Sleeve bearings
• Universal mounting; Threaded mounting holes
• Hardware included

9Watts - 0.30Amps - 230 Volts - CCW Rot - 1550 RPM  - 2.83'' A Dim - Hubless Shaft