Conduit & Fittings

Condenser fan motor used on Whirlpool® brands.

1/6HP - 115 Voltage - 2.00Amps - PSC Type - 1/1625 RPM - REVPLUG Rot. - 4.75'' Body - BALL Bearing - 2.8''x1/2'' shaft

This evaporator motor is located in the back of the freezer and circulates air over the coils. - Direct replacement - Fits GE® built refrigerators

 1/15 HP -  1/1050 RPM - 115V - 3.40 Amps - CCW Rot - SP Type - 3.80'' Body - 3.0'' x 3/8''Shaft - SLEEVE Bearing

Condenser fan motor used on GE® brands. This motor is used to cool the compressor, and prevent overheating.

1/4HP - 115 Voltage - 4.90Amps - PSC Type - 1/1075 RPM - REV Rot. - 4.25'' Body - SLEEVE Bearing - 3.0''x1/2'' shaft

1/6 HP - 115 Volts - 2.4 Amps - 5/370 Cap. - 1/1075 RPM - Revers. Rotation - 4.52" Body - Ball Bearing - 1/2"×3.4" Shaft

The condenser fan moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator. - Fits Frigidaire® and Electrolux® models

This evaporator motor is located in the back of the freezer and circulates air over the coils. - Direct replacement - Fits GE® built refrigerators

Supplied with Mounting Bracket for Easy Installation. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Heavy Gage Steel Casting with a Hammertone Powder Coat Finish, Making it More Sound Absorbing, Durable, Impact Resistant and Rustproof. High Quality Maintenance-Free Balanced Motor, Make it Vibrant Free, Quieter and Longer Lasting.

Plug-in ground design - no tools required. Maximum rating of 300W / 3.0 Amps @ 77°F (25°C). 115 Volts - 50/60 Hz. Variable speed to control wood and coal burning fireplace and  inline fans. On-Off switch, high to low variable. No internal wiring - just plug in and enjoy. Help reduce fan or blower noise. 

MC3 is a Solid-State AC Motor Speed Fan Control. It is designed for mounting in a 2" X 4" electrical wall box. It operates from 115 Volts, 50/60 Hz, and has a maximum rating of 2.5 Amps @ 104°F (40°C). The variable-speed motor control contains an On/Off line switch and a high gain RFI noise suppression filter. Applications include range hoods, vibrators, humidifiers, fireplace blowers, fans, laminar flow hoods, heat tunnel sand stirrers.

The Vortex Powerfan VMF Series is an in-line duct fan specifically designed to maximize the airflow performance with minimal noise levels in a small, compact housing. MF500 / VMF500 is Suitable with a 5" Duct, 205CFM.

V-14XL is equipped with a mixed-flow impeller allowing more air volume than any other comparable impeller design and runs more quieter. 100% speed controllable and easing air flow adjustment (optional speed control). Permanently lubricated maintenance-free ball bearing motor. Power cord included. 

Supplied with Mounting Bracket for Easy Installation. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Heavy Gage Steel Casting with a Hammertone Powder Coat Finish, Making it More Sound Absorbing, Durable, Impact Resistant and Rustproof. High Quality Maintenance-Free Balanced Motor, Make it Vibrant Free, Quieter and Longer Lasting.

The VTX400P has a built in automatic pressure switch that detects when air is flowing through the ventilation duct. It will automatically turn on for a period of 10 minutes and shut off for a period of 15 seconds and turn back on if there is still positive pressure from the dryer.

Vortex Powerfans VTX400P inline blowers, for 4 in diameter duct, is ideal to solve the problems caused by long duct runs on clothes dryers. In a clothing dryer application, when the dryer is turned on, the VTX400P will automatically turn on.

The AIRMIX AM1000 destratification fan creates uniform air temperatures from floor to ceiling for maximum thermal comfort and energy savings up to 35% in the heating season and up to 25% in the cooling season.

Prewired with 120V Power Cord. Mounting Bracket included and can be Mounted in any Position. Suitable for Airsteam Temperatures up to 140^oF/60^oC. Energy Efficient Variable Speed Motor, Compact and Super Quiet. 10 Year Warranty.