Conduit & Fittings

Thermoplastic Polyester Housing - 50mm Thread - Power supply: 20 to 250 VAC - Flush Mounting - Output: SCR, make switching - LED-indication for output ON - Cable: 2m, grey PVC, oil proof

Housing Material: Body-In nickel-plated brass; Front-Grey thermoplastic polyester; Back-In nickel-plated brass - 30mm Thread - Power supply: 10 to 40 VDC - Normally Open Switching - Protection: Reverse polarity, short-circuit and transients - Plug: M12 x 1

Cylindrical Nickel-Plated Brass Housing - Increased Operating Distance - Rated operational voltage: 10 to 36 VDC (ripple included) - LED indication for output ON, short-circuit and overload - Degree of protection: IP67 - M12 Plug

Housing with Thread Length of 50 mm - Long Body - Sensing Distance 8mm (Extended Range) - Rated Operational Voltage: 8 to 60 VDC (ripple included) - E1-Type Approved for Mobile Equipment - Protection: Short-circuit, inductive load, overload, reverse polarity and transients

Cylindrical Nickel-Plated Brass Housing - Short Housing with Thread Length of 30 mm - 10 to 36 VDC (ripple included) - Flush Mounting - Sensing Distance: 15mm - Normally Closed - Protection: reverse polarity, short circuit, transients - M12 Plug

Stainless Steel Housing - 30mm Thread - Power supply: 10 to 40 VDC - Flush Mounting - Output: Transistor NPN, Normally Closed (NC) Switching - LED-indication for output ON - Protection: Short-circuit and reverse polarity - Cable: 2m, grey PVC, oil proof

Cylindrical Housing with Threaded Barrel - Stainless Steel Housing - 10 to 36 VDC (ripple included) - Flush Mounting - M8 Plug - NPN-normally closed Output - Protection: Short-circuit, reverse polarity, transients and overload

Cylindrical Stainless Steel Housing - Long Housing with Thread Length of 45 mm - 10 to 36 VDC (ripple included) - Flush Mounting - Sensing Distance: 2mm - N.O. and N.C. - Protection: Short-circuit, reverse polarity and transients - M8 Plug

Cylindrical Nickel-Plated Brass Housing - Short Housing with Thread Length of 30 mm - 10 to 36 VDC (ripple included) - Flush Mounting - Sensing Distance: 8mm - Normally Closed - Protection: reverse polarity, short circuit, transients - M12 Plug

Cylindrical Nickel-Plated Brass Housing - Short Housing with Thread Length of 30 mm - 10 to 36 VDC (ripple included) - Flush Mounting - Sensing Distance: 10mm - Normally Closed - Protection: reverse polarity, short circuit, transients - M12 Plug

Thermoplastic Polyester Housing: 40 x 40 x 118 mm - DC types 4-wire NO & NC, 10-30 VDC - Non-Flush Mounting - LED-indication for power and output ON - Protection: Reverse polarity, short-circuit - Cable gland: M20 x 1.5

Cylindrical Housing - Rated operational voltage: 10 to 36 VDC (ripple included) - 4 x 90° LED indication for output ON, short-circuit and overload - Protection: reverse polarity, short circuit, transients - M12 Plug - High-pressure washdown resistant

Cylindrical Stainless Steel Housing - 50mm Thread - Power supply: 7 to 9 VDC - Protection: Reverse polarity - Cable: 2m, grey PVC, oil proof

Nickel-Plated Brass Housing - Extra Short Body Versions - Rated operational voltage: 10 to 36 VDC (ripple included) - LED indication for output ON - Protection: reverse polarity, short circuit, transients - M12 X 1, 4 Pin, Male Connector

Housing with Thread Length of 50 mm - Long Body - Sensing Distance 4mm (Extended Range) - Rated Operational Voltage: 8 to 60 VDC (ripple included) - E1-Type Approved for Mobile Equipment - Protection: Short-circuit, inductive load, overload, reverse polarity and transients

Cylindrical Nickel-Plated Brass Housing - Short Housing with Thread Length of 30 mm - 10 to 36 VDC (ripple included) - Non-Flush Mounting - Sensing Distance: 22mm - Normally Open - Protection: reverse polarity, short circuit, transients - 2m Grey PVC Cable

Stainless Steel Housing - 50mm Thread - Power supply: 10 to 40 VDC - Non-Flush Mounting - Output: Transistor NPN, Normally Open (NO) Switching - LED-indication for output ON - Protection: Short-circuit and reverse polarity - Plug: M12 x 1

Cylindrical Housing with Threaded Barrel - Stainless Steel Housing - 10 to 30 VDC (ripple included) - Flush Mounting - Sensing distance 1.3mm - 2m PVC Cable - PNP-normally open Output - Protection: Short-circuit, reverse polarity and transients

Cylindrical Nickel-Plated Brass Housing - Standard Range - Rated operational voltage: 10 to 36 VDC (ripple included) - LED indication for output ON - Protection: reverse polarity, short circuit, transients - 2m PVC Cable