Conduit & Fittings

The OCA series cabinet unit heater offers a wide range of power ratings, voltage and control options. Most installations benefit from the heater's custom advantages. The cabinet unit heater can be mounted on the floor, wall or ceiling. It can also be recessed (wall or ceiling) as required. The fans are powered by two-speed motors (Hi/Low option) with permanently lubricated sleeve bearings for many years of trouble-free service. The blower wheel is mounted directly on the motor shafts, which reduces the noise level. No belts or bearing blocks are required for the blowers. Four cabinet sizes are available.

OUELLET OCA04000AM - 4000W - 240V - 1 Phase - Almond

Ex9CA Series Safety Contactor - 3-Pole - 18A Rated Current - AC Coil - 1NO+1NC (1 Normally Open + 1 Normally Closed) Auxiliary Contact - 240V Control Voltage - 50/60 Hz - DIN rail mounting (35mm)

Ex9CD Series Standard IEC Contactor - Full Voltage Non-Reversing (FVNR) - 3-Poles (3P; 3NO) - 80A Rated Current - Screw Terminals - 240Vac Coil Voltage - 50/60 Hz - 1NO+1NC (1 Normally Open + 1 Normally Closed) Auxiliary Contact - M10 Screw Connection (Power Circuits) - Frame Size 4

BRITECH BR-SM050 - Custom Residential Snow Melting Cables - 1800W - 7.5A - 1 Cable - 50 sq. ft. -  4.65 sq.m - 240V

The OCA series cabinet unit heater offers a wide range of power ratings, voltage and control options. Most installations benefit from the heater's custom advantages. The cabinet unit heater can be mounted on the floor, wall or ceiling. It can also be recessed (wall or ceiling) as required. The fans are powered by two-speed motors (Hi/Low option) with permanently lubricated sleeve bearings for many years of trouble-free service. The blower wheel is mounted directly on the motor shafts, which reduces the noise level. No belts or bearing blocks are required for the blowers. Four cabinet sizes are available.

Ex9C Series Standard IEC Contactor - Full Voltage Non-Reversing - 3-Pole - 38A Rated Current - AC Coil - 1NO+1NC Auxiliary Contact - 240V Control Voltage - 50/60 Hz - 3NO Main Power Contact - IP20

Siemens MLTB1-1200FT Feed Through Tap Box 1200A - 3W - 1 Phase

Black; Braided inner protection, FEP outer jacket

Danfoss TX-SH (Storage Heating System) heating cables are energized to warm a thermal mass below the floor surface. Danfoss TX storage heating cables are the ideal way to take advantage of local on-peak and off-peak energy pricing.

Ex9CD Series Standard IEC Contactor - Full Voltage Non-Reversing (FVNR) - 4-Poles (4P; 4NO) - 9A Rated Current - Screw Terminals - 240Vac Coil Voltage - 50/60 Hz - M3.5 Screw Connection (Power Circuits) - Frame Size 1

Edwards 94R-R5 - Adaptabeacon Strobe Light - Single Flash - c/w Protective Dome - 240VAC - 0.05A - Red

The OCA series cabinet unit heater offers a wide range of power ratings, voltage and control options. Most installations benefit from the heater's custom advantages. The cabinet unit heater can be mounted on the floor, wall or ceiling. It can also be recessed (wall or ceiling) as required. The fans are powered by two-speed motors (Hi/Low option) with permanently lubricated sleeve bearings for many years of trouble-free service. The blower wheel is mounted directly on the motor shafts, which reduces the noise level. No belts or bearing blocks are required for the blowers. Four cabinet sizes are available.

OUELLET OCA08000BL - 8000W - 240V - 1 Phase - White

Techspan TC1D2501U7 - 3 Pole Contactor With AC Operating Coil - 25A - 1NC - 240VAC - 50/60 HZ

Twin Conductor Cable, Single Point Connection, Easy to Install, Eliminates EMFs, Durable Construction, 20-Year Warranty. Cable Strapping is supplied with product. Power leads are 10ft. in length.

Danfoss New LX - Electric Floor Heating Installation Video

OUELLET OPX2A1800 - 1800W - 240V - 1 Phase - T2A

The OCA series cabinet unit heater offers a wide range of power ratings, voltage and control options. Most installations benefit from the heater's custom advantages. The cabinet unit heater can be mounted on the floor, wall or ceiling. It can also be recessed (wall or ceiling) as required. The fans are powered by two-speed motors (Hi/Low option) with permanently lubricated sleeve bearings for many years of trouble-free service. The blower wheel is mounted directly on the motor shafts, which reduces the noise level. No belts or bearing blocks are required for the blowers. Four cabinet sizes are available.