Conduit & Fittings

20 Amp, 250 Volt 3-Phase, NEMA L15-20R, 3P, 4W, Flip Lid with Receptacle, Single Locking Flush Mounting Receptacle, Corrosion Resistant, Grounding, Wetguard Flip Lid, Back & Side Wired, Nickel-Plated Brass Strap, Yellow

The RSLM is a very slim electromechanical relay that can switch resistive loads with a maximum switching current of 6A 250VAC/30VDC. It is 1 changeover contact (SPDT) with 1 NO and 1 NC Switch. Control Coil 24VAC/DC, DIN Rail Socket for Slim Relay Included.

8 Pin Socket Mounting, 2 Change Over Conntacts (DPDT {2-form C}), 10Amp Contact Rating, 115/120Volt AC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RCP Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RCI002120VAC, RCI002115/120VAC, RCI002A120V

14 Pin Socket Mounting, 4 Change Over Conntact (DPDT- 4 form C), 10Amp Contact Rating, 24Volt AC Coil, with LED Indication.  (Socket for RPYA004 Relays is ZPY14A,  need to be purchased separately. )

DIN Socket for RRM004 relay without hold down spring, Replacing old Carlo Gavazzi model ZMI4NA-M. 

15 Amp, 250 Volt, NEMA L6-15R, 2P, 3W, Flip Lid with Receptacle, Single Locking Receptacle, Industrial Grade, Grounding, Wetguard Flip Lid, Side Wired, Nickel-Plated Brass Strap, Yellow

11 Pin Socket Mounting, 3 Change Over Conntact (DPDT- 3 form C), 10Amp Contact Rating, 12Volt DC Coil, with LED Indication.  (Socket for RPYA003 Relays is ZPY11A,  need to be purchased separately. )

8 Pin Socket Mounting, 2 Change Over Conntacts (DPDT {2-form C}), 10Amp Contact Rating, 24Volt DC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RMIA210 Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RRM002D24V

Replacement bake / broil element, can be used on Peerless® and Premier® models - Dimensions: 15.00"L x 9.75"W, approx. 9.75" between terminals

8 Pin Socket Mounting, 2 Change Over Conntact (DPDT- 2 form C), 10Amp Contact Rating, 120V AC Coil, with LED Indication.  (Socket for RPYA001 Relays is ZPY08A,  need to be purchased separately. )

11 Pin Socket Mounting, 3 Change Over Conntacts (3PDT {3-form C}), 10Amp Contact Rating, 230Volt AC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RCP Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RCI003A240V

The outside sheath is made of high grade stainless steel - Sealed with a high temp liquid silicone compound straight out of the annealing oven - Prevents any moisture in the element

8 Pin Socket Mounting, 1 Change Over Conntact (DPDT- 1form C), 16Amp Contact Rating, 24V AC Coil, with LED Indication.  (Socket for RPYA001 Relays is ZPY08A,  need to be purchased separately. )

Etlin Daniels K24-12SEW - RS7 DBL END W/LONG BRKT 12" LEADS - 250V - 8A - Assembled Bracket for T3 119 mm Lamps

Etlin Daniels K21-12SEW - R7S CERAMIC SOCKET ENDS - 200C LEADS - 250V - 8A

Etlin Daniels K23-12SEW - RS7 DBL END W/SHORT BRKT 12" LEADS - 250V - 8A - Assembled Bracket for T4 79 mm Lamps

Techspan 35-421 - Standard Pushbutton - Off-(On) - Normally Open SPST - Solder Eyelet Terminal

Techspan 35-422 - Standard Pushbutton - On-Off - SPST - White Plastic Actuator - Solder Eyelet Terminal

Techspan 35-420 - Standard Pushbutton - Off-(On) - Normally Open SPST - Red Plastic Actuator