Conduit & Fittings

NEMA 1 - 250V DPST w/ External Manual Override Switch "Little Gray Box", WH40 provides an external manual lever permitting the user to turn the water heater on or off ahead of the schedule. The time switch will then revert back to its daily preset schedule. 

- Frequency: 60Hz
- Response Time: 25mS max at 500 ohm fault
- Operating Temperature: -35ºC to 66ºC
- Reset Type: Field selectable – automatic or manual reset
- Enclosure: NEMA 4X wet location rated
- Switching Interface: Double insulated and recessed

- Frequency: 60Hz
- Response Time: 25mS max at 500 ohm fault
- Operating Temperature: -35ºC to 66ºC
- Reset Type: Field selectable – automatic or manual reset
- Enclosure: NEMA 4X wet location rated
- Switching Interface: Double insulated and recessed

The Heating element works when a switch on the motor turns on the heating element, which heats the dryer. When the dryer reaches a pre-set temperature, the element is turns off. - Direct replacement dryer element for Whirlpool® 279838 - Nichrome heavy gauge construction

The OAV vertical unit heater is designed to heat buildings with high ceilings. This vertical unit heater can be used to recirculate the warm air accumulated near ceilings. Three optional air diffusers are available to produce various air distribution patterns. The OAV is available from 5kW to 60 kW at the usual voltage supplies.

The OAV vertical unit heater is designed to heat buildings with high ceilings. This vertical unit heater can be used to recirculate the warm air accumulated near ceilings. Three optional air diffusers are available to produce various air distribution patterns. The OAV is available from 5kW to 60 kW at the usual voltage supplies.

The Heating element works when a switch on the motor turns on the heating element, which heats the dryer. When the dryer reaches a pre-set temperature, the element is turns off. - Direct replacement dryer element for Samsung® DC97-14486A - Nichrome heavy gauge construction

Complete tubular heating element includes 2 piece tube and coil. Fits many Maytag® models. A lower cost alternative to the factory part. - Complete assembly with housing

The OAV vertical unit heater is designed to heat buildings with high ceilings. This vertical unit heater can be used to recirculate the warm air accumulated near ceilings. Three optional air diffusers are available to produce various air distribution patterns. The OAV is available from 5kW to 60 kW at the usual voltage supplies.

The Heating element works when a switch on the motor turns on the heating element, which heats the dryer. When the dryer reaches a pre-set temperature, the element is turns off. - Direct replacement dryer element for SpeedQueen® 61927 - Nichrome heavy gauge construction

The Heating element works when a switch on the motor turns on the heating element, which heats the dryer. When the dryer reaches a pre-set temperature, the element is turns off. - Nichrome heavy gauge construction

The Heating element works when a switch on the motor turns on the heating element, which heats the dryer. When the dryer reaches a pre-set temperature, the element is turns off.  - Direct replacement dryer element for Maytag® WE11X103 - Nichrome heavy gauge construction

The OAV vertical unit heater is designed to heat buildings with high ceilings. This vertical unit heater can be used to recirculate the warm air accumulated near ceilings. Three optional air diffusers are available to produce various air distribution patterns. The OAV is available from 5kW to 60 kW at the usual voltage supplies.

Element is strung with a coiled wire made of a nickel and a chrome alloy. Can be used to replace Frigiadaire® models. - Complete assembly with housing

The Heating element works when a switch on the motor turns on the heating element, which heats the dryer. When the dryer reaches a pre-set temperature, the element is turns off.  - Nichrome heavy gauge construction

Satco S4536 - C15 - Incandescent - 60 Watt - 120V - Medium Base - Clear - Dimmable - 8000 Average Rated Hours

The OAV vertical unit heater is designed to heat buildings with high ceilings. This vertical unit heater can be used to recirculate the warm air accumulated near ceilings. Three optional air diffusers are available to produce various air distribution patterns. The OAV is available from 5kW to 60 kW at the usual voltage supplies.

Direct replacement dryer element coil for Bosch® 00436460 - Nichrome heavy gauge construction

The OAV vertical unit heater is designed to heat buildings with high ceilings. This vertical unit heater can be used to recirculate the warm air accumulated near ceilings. Three optional air diffusers are available to produce various air distribution patterns. The OAV is available from 5kW to 60 kW at the usual voltage supplies.