Conduit & Fittings

AXIAL FAN - 460 CFM , 72W, 115V, 3400 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Plastic, Connection: Screw

110 to 125VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. - Maximum RLA 13.3 Amps - Prevents low voltage starting problems - Replaces relay, overload and provides a boost for hard start and unbalanced systems - 243 to 292 MFD

AXIAL FAN - 106 CFM ,22W, 115V, 3000 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Metal, Connection: Wire Leads.

These relays, overloads and hard start combinations can also be used on systems without run capacitors - Locked rotor protection eliminates start winding overheating - Safe, reliable, long lasting PTC relay - Can be used with and without start capacitor

R7-RB25 Blower Part - 1/40HP - 1.00A - 1/1550 RPM - 130CFM - 1.50"×5/16" Shaft - 92-A8602 Bracket Part - 66-A508216 Blower Part - 5 1/16" Dia - 2 5/32" Width - 5/16" Bore - CW Rot

110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, start and run capacitor. Used on refrigeration systems without run capacitors. Rated for 1/12 HP to 1/5 HP compressors. Maximum RLA 4.05 Amps. This kit includes a new run capacitor. - Prevents low voltage starting problems - Ideal solution for replacing all four components in a system with a run capacitor - Designed for modern high efficiency compressors - Helps older compressors start and run cooler

110 to 125VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/4 HP to 1/3 HP compressors. Maximum RLA 6.8 Amps.Prevents low voltage starting problems - Replaces relay, overload and provides a boost for hard start and unbalanced systems

AXIAL FAN - 230 CFM , 42W, 115V, 3400 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Plastic, Connection: Wire Leads

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired - Locked rotor protection eliminates start winding overheating - PRO series installs on "pin-type" terminal - Can be used with and without start capacitor motors from 1/12 to 1/5 hp

AXIAL FAN - 106 CFM ,22W, 115V, 3000 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Sleeve Bearing, Impeller: Metal, Connection: Terminal.

These relays, overloads and hard start combinations can also be used on systems without run capacitors - Locked rotor protection eliminates start winding overheating - Safe, reliable, long lasting PTC relay - Can be used with and without start capacitor

1/40HP - 1.00 Amps - 1/1550 RPM - 1.50"×5/16"Shaft - CW Rotation - SP Type - 2.40''Body - SLEEVE Bearing

1/115HP - 115 Voltage - 0.60Amps - SP Type - 1/3000 RPM - CW Rot. - 0.55'' Body - SLEEVE Bearing - 1.7'' x 7/32'' shaft

Includes: mounting base plate w/ grommets - 50W - 1/1250 SPD/RPM - 115V - 0.86A - CW Rotation - SP Type - Blower: 12.9 x 4.3 x 3.6 - Blower Wheel: 2.6 x 9.4  - SLEEVE Bearing - PLATE Mounting

212 CFM - 1/2500 SPD/RPM - 115V - 1.25A - SP Type - CCW Rotation - OPEN Enclosure - 14.8''Body - 2''x4.6''Shaft - SLEEVE Bearing - TABS Mounting

1/500 HP - 1/2600 SPD/RPM - 115V - 0.22A - SP Type - CCW Rotation - OPEN Enclosure - 0.38''Body - SKEL Frame - 1.5''x1/8'' Shaft - SLEEVE Bearing - STUD Mounting

50W - 1500 RPM - 115 Volts - 1.70 AMPS - ONE Speed - CW Rotation - SP Type - 3.50'' Body - 3.82'' Frame - 3.0'' x 5/16'' Shaft - Unit Bearing - PADLEG Mounting

Supply Voltage: 115 VAC - Output: SPST Relay - Housing: 70 x 57 x 86 mm - Protection: Reverse output, transients, short-circuit - Connection: Screw terminals

Includes: Blower, mounting base, thermal switch assembly, variable speed control, & cord w/ 3 prong plug - 53W - 1/2400 SPD/RPM - 115V - 0.92A - CCW Rotation - SP Type - OPEN Enclosure - Blower: 12.8 x 4.6 x 4.3 - SKEL Frame - Blower wheel: 3 x 4 Shaft - BALL Bearing - PLATE Mounting