Conduit & Fittings

Lovato PSL1M10024 - MODULAR SWITCHING POWER SUPPLY - SINGLE PHASE - 24VDC - 4.2A / 100W

Lovato PSL110048 - DIN RAIL SWITCHING POWER SUPPLY - SINGLE PHASE - 48VDC - 2.1A / 100W

The PSE1 single phase power supplies have compact dimensions and are DIN rail mountable. They are used to supply electromechanical and electronic devices with DC control, such as contactors, time relays, sensors, PLCs, DC motors, displays, SSRs and other equipment normally found in automation systems.

Hammond 170AE - Line Transformers - Autotransformers - Hard Wired - Step Down 230-115VAC Or Step Up 115-230VAC - 50/60 Hz - 100VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Totally enclosed rear case, includes handy internal grounding bolt - Extra vacuum varnish for use in high humidity

100VA, Primary 115VAC, 50/60 Hz., Secondary 115VAC. Provides complete circuit isolation. Faraday electrostatic shield between primary & secondary to greatly attenuate surges and noise.

Hammond 175A-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 100VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 172A - Line Transformers - Step Down Isolation - Plug-In - 230VAC to 115VAC - 50/60 Hz - 100VA - Circuit breaker in primary - Provides circuit isolation & steps down primary voltage - Hi-pot tested to 2 KV RMS - Electrostatic shield between primary & secondary

Hammond 170A - Line Transformers - Autotransformers - Hard Wired - Step Down 230-115VAC Or Step Up 115-230VAC - 50/60 Hz - 100VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Connection by flexible leads, 8" minimum length

Hammond 169C - Line Transformers - Straight Isolation  - Hard Wired - Primary 115VAC - 60 Hz - 100VA - Secondary taps @ 90, 100, 110, 115, 120 & 130VAC - Electrostatic shield between primary & secondary - Connection by flexible leads, 8" minimum length - Perfect for critical line voltage needs (examples: older "classic" tube equipment or Japanese 100V equipment).