Conduit & Fittings

Variable speed drive, VLA1 type, single-phase, supply 200...240VAC (50/60Hz). Built-in EMC suppressor, Cat. C2, 1.5kW

Variable speed drive, VLA1 type, single-phase, supply 200...240VAC (50/60Hz). Built-in EMC suppressor, Cat. C2, 2.2kW

Delta Control Transformer DCE2000UH, Single Phase, 2000VA, from 600/480V to 120/240V, Copper Windings, Enclosed Style

Delta Control Transformer DCE1500LH, Single Phase, 1500VA, from 380/347V to 120/240V, Copper Windings, Enclosed Style

* Please note the lead time for this item is around 12-14 weeks (if no further delay)

Delta Control Transformer DCE1500UH, Single Phase, 1500VA, from 600/480V to 120/240V, Copper Windings, Enclosed Style

Delta Control Transformer DCE1500NH, Single Phase, 1500VA, from 208/416V to 120/240V, Copper Windings, Enclosed Style

Delta Control Transformer DCE2000PH, Single Phase, 2000VA, from 240/480V to 120/240V, Copper Windings, Enclosed Style

Delta Control Transformer DCE1500IE, Single Phase, 1500VA, from 277V to 120V, Copper Windings, Enclosed Style

Delta Control Transformer DCE1500PH, Single Phase, 1500VA, from 240/480V to 120/240V, Copper Windings, Enclosed Style

Delta Control Transformer DCO1500UH, Single Phase, 1500VA, from 600/480V to 120/240V, Copper Windings, Open Style

Delta Control Transformer DCO2000PH, Single Phase, 2000VA, from 240/480V to 120/240V, Copper Windings, Open Style

Delta Control Transformer DCO1500NH, Single Phase, 1500VA, from 208/416V to 120/240V, Copper Windings, Open Style

Delta Control Transformer DCO2000UH, Single Phase, 2000VA, from 600/480V to 120/240V, Copper Windings, Open Style

Delta Control Transformer DCO1500LH, Single Phase, 1500VA, from 347/380V to 120/240V, Copper Windings, Open Style

Delta Control Transformer DCO1500PH, Single Phase, 1500VA, from 240/480V to 120/240V, Copper Windings, Open Style

Delta Control Transformer DCO1500IE, Single Phase, 1500VA, from 277V to 120V, Copper Windings, Open Style

Hammond 170J - Line Transformers - Autotransformers - Hard Wired - Step Down 230-115VAC Or Step Up 115-230VAC - 50/60 Hz - 2000VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Connection by flexible leads, 8" minimum length

Hammond 176G - Line Transformers  - Autotransformers - Plug-In - Step Up 115-230VAC - 50/60 Hz - 1500VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).

Hammond 168J - Line Transformers - Autotransformers - Hard Wired - Input 115VAC - 50/60 Hz - 2000VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation