Conduit & Fittings

Lutron RRD-8S-DV-TC - RA2 Select / RadioRA 2 120V-277V - 8A digital switch - Terracotta

Lutron RRD-8S-DV-TP - RA2 Select / RadioRA 2 120V-277V - 8A digital switch - Taupe

Lutron RRD-8S-DV-TQ - RA2 Select / RadioRA 2 120V-277V - 8A digital switch - Turquoise

Lutron RRD-8S-DV-WH - RA2 Select / RadioRA 2 120V-277V - 8A digital switch - White

Acuity Brands WSD PDT 347 WH - Wall Switch Sensor - Passive Dual Technology - 347 VAC - White - Standard Temp/Humidity

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/wsx-pdt-347-wh.html 

Acuity Brands WSD VA WH - Wall Switch Sensor - Passive Infrared (PIR) - Vacancy Only - 120/277 VAC - White - Standard Temp/Humidity

Acuity Brands WSD VA IV - Wall Switch Sensor - Passive Infrared (PIR) - Vacancy Only - 120/277 VAC - Ivory - Standard Temp/Humidity

Acuity Brands WSD VA 347 WH - Wall Switch Sensor - Passive Infrared (PIR) - Vacancy Only - 347 VAC - White - Standard Temp/Humidity

Acuity Brands WSD LV R WH - Wall Switch Sensor - Low Voltage - Isolated Low Voltage Relay - 120/277 VAC - White

Satco 96-111 - Maestro Occupancy Sensor Switch - Single Pole - White Finish - Ideal For Small Rooms - 250W Incandescent, Halogen, ELV, 200W MLV, 150W CFL, LED; 2 A Ballasts

Satco 96-112 - Maestro Occupancy Sensor Switch - Ivory Finish

Satco 96-113 - Maestro Occupancy Sensor Switch - Almond Finish

Satco 96-114 - Maestro Vacancy Sensor Switch - White Finish

Satco 96-115 - Maestro Vacancy Sensor Switch - Ivory Finish

Satco 96-116 - Maestro Vacancy Sensor Switch - Almond Finish

Synergy ISD BC 120/277 WH M10 - ISD Wall Box Dimmer - Ballast Controller - 120/277 VAC - White

- Programmable without removing switch plate
- Connect up to 9 devices with neutral wiring or up to 2 devices without neutral wiring on a single traveler
- sPODMRA MWO can be used in conjunction with WSXA MWO
- Compatible with 0-10V dimming, Sinks < 50 mA
- Include Screwless Wall Plate: Available in WH
- Each MWO device can switch and dim individually
- Switching and Dimming will be performed simultaneously across the devices connected through the communication wire

- Programmable without removing switch plate
- Connect up to 9 devices with neutral wiring or up to 2 devices without neutral wiring on a single traveler
- sPODMRA MWO can be used in conjunction with WSXA MWO
- Compatible with 0-10V dimming, Sinks < 50 mA
- Include Screwless Wall Plate: Available in WH
- Each MWO device can switch and dim individually
- Switching and Dimming will be performed simultaneously across the devices connected through the communication wire

Acuity Brands WSXA MWO PDT D WH - Wall Switch Sensor - Multi-way Operation - Passive Dual Technology - 0-10 VDC Dimming - 120-277 VAC - White