Conduit & Fittings

Techspan 669653 - Cold Weather Electrical Tape - 600 Volt Rating - 66' Length - ‘ICE’ Blue - 1 Roll

• Good adhesion and elasticity
• All weather performance
• Great tensile strength
• Resistant to UV, abrasion and corrosion
• Flame-retardant

List price is for whole pack of 10 pieces.

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity, excellent tensile strength
• Highly resistant to UV, abrasion and corrosion, flame-retardant

• Used for marking, identifying, wire harnessing and insulating up to 600V
• Used for jacketing on high voltage splices
• All weather performance, high tensile strength
• Resistant to UV, abrasion and corrosion, flame-retardant

List price is for whole pack of 10 pieces.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity
• Highly resistant to UV, abrasion and corrosion, flame-retardant

Techspan 769669B - PVC Electrical Tape - Grey - 60' x 3/4" x 0.007" - 100 Rolls/Sleeve - Features: Flame Retardant - Temperature Rating: -10°C TO 80°C (14°F TO 176°F)

• Used for marking, identifying, wire harnessing and insulating up to 600V
• Used for jacketing on high voltage splices
• All weather performance, high tensile strength
• Resistant to UV, abrasion and corrosion, flame-retardant

List price is for whole pack of 10 pieces.

WW-MSR is a 125 mil (3.2mm) self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 volts. For water sealing ductwork, cable ends and all types of splices. Normally WW-MSR should be jacketed with vinyl tape.

• Used for marking, identifying, and insulating up to 600V
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity
• Highly resistant to UV, abrasion and corrosion, flame-retardant

Tape PVC Electrical Yellow 18.3M(60FT) Roll,Features: FLAME RETARDANT,Thickness: 0.007"(0.18MM)

• 600 Volt rating
• Flame Retardant
• Weather-Resistant
• Can be used as primary insulation at not more than 600 Volts
• Lead-free • Temperature rating: -18°C to 105°C (0°F to 221°F)
• Easily applied at low temperatures • Highly elastic
• Dimensions (Length x Width x Thickness): 20m x 19mm x .18mm (66' x 3/4" x .007")
• CSA Approved/UL Listed

Techspan 769649B, Tape PVC Electrical Black/Blue/Green/Red/White/Yellow 20pks(120 Rolls)/Ctn

• Good adhesion and elasticity
• All weather performance
• Great tensile strength
• Resistant to UV, abrasion and corrosion
• Flame-retardant

List price is for whole pack of 10 pieces.

• Used for marking, identifying, and insulating up to 600V
• Used for wire harnessing, jacketing on high voltage splices
• Superior adhesion and elasticity
• Highly resistant to UV, abrasion and corrosion, flame-retardant

Tape PVC Electrical Brown 18.3M(60FT) Roll,Features: FLAME RETARDANT,Thickness: 0.007"(0.18MM)

• Good adhesion and elasticity
• All weather performance
• Great tensile strength
• Resistant to UV, abrasion and corrosion
• Flame-retardant

List price is for whole pack of 10 pieces.

• Used for marking, identifying, wire harnessing and insulating up to 600V
• Used for jacketing on high voltage splices
• All weather performance, high tensile strength
• Resistant to UV, abrasion and corrosion, flame-retardant

List price is for whole pack of 10 pieces.

WW-RSL is a 30 mil (0.76mm) self-amalgamating, low voltage rubber tape which is UL-510 Listed for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. WW-RSL is compatible with all extruded dielectric cable insulations. Meet ASTM D-4388 type I standard.