Conduit & Fittings

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

The Intermatic PE30065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer.

For electric heat, hot gas or compressor shutdown defrost. The DTAV40 Series Auto Voltage Defrost Timer is applicable to air defrost (compressor shutdown) and electric or hot gas defrost systems where the defrost cycle is terminated by the timer. If the coil is frost-free, the timer can also be terminated by temperature or pressure switches before the programmed defrost termination time has been reached. The time termination functions as a fail-safe and terminates the defrost cycle if the temperature or pressure switch fails to do so.

Provides 8 field selectable timer durations. 30 sec. - 1 min. - 3 min. - 5 min. - 10 min. - 30 min. - 1 hr. - 4 hrs. 

Common Applications: Poultry Houses, Foggers, Nurseries, Fans, Feeders, Pumps, Misters, Irrigation.

200A Disconnect Switch - 4x 50A 125/250V Twist Lock (Cali Std) - 6x 20A 125V T-Slot GFCI Duplex (5-20R) - 2x 30A 250V Twist Lock (L6-30R) - 1x 4.8A 125V USB-A (Quad) - Hoisting Eyelets - Foam Filled Wheels - Storage Shelf - Cable Hook - Weatherproof Electrical Enclosures - USB-A Charging Receptacle - Built-In Beacon360 Area Light

100A Disconnect Switch - 2x 50A 125/250V Twist Lock (Cali Std) - 6x 20A 125V T-Slot GFCI Duplex (5-20R) - 2x 30A 250V Twist Lock (L6-30R) - 1x 4.8A 125V USB-A (Quad) - Hoisting Eyelets - Foam Filled Wheels - Storage Shelf - Cable Hook - Weatherproof Electrical Enclosures - USB-A Charging Receptacle - Built-In Beacon360 Area Light

Delay On Timer 3 Hour Maximum 20A 120-240V Indoor NEMA 4X Enclosure

Adjustable Percentage Timer 24 Hour Maximum 20A 120-240V Indoor NEMA 4X Enclosure

The IG Series Surge Protective Devices are designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL 1449 3rd edition, the IG series is approved for residential/light commercial services (AC power, telephone and/or cable).

The Intermatic IG1300-2T-1C3 AC Surge Protector provides protection for 2 telephone lines (analog phone line, modem, or DSL) and 1 coax line (cable TV, cable internet or satellite TV). Protect all your valuable home or small business electronics from transient surges with the Intermatic IG1300-2T-1C3 hardwired surge protective device. It provides greater capacity to handle surge energy (based on the close location to the service ground) compared to standard plug-in strips and is designed for 120/240-Volt single or (split-phase) panels.

Invest in peace of mind with the AG3000! The easy-to-install AG3000 surge protector is the perfect add-on for HVAC equipment. It features unmatched surge protection ratings and a 3-year, $7,500 connected equipment warranty.

The Intermatic IG1240RC3 AC Surge Protector features six modes of protection and is recommended for residential and light commercial applications. It is intended for installation on 120/240 volt AC panels. The IG1240RC3 incorporates the newest developments in MOV technology and provides individual component thermal protection and monitoring. The failure of a single component will turn the LED indicator OFF and turn the alarm indicator ON. The IG Series Surge Protective Devices are designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances.

The Intermatic IG1300-4T-2C3 AC Surge Protector provides protection for 4 telephone lines (analog phone line, modem, or DSL) and 2 coax lines (cable TV, cable internet or satellite TV). Protect all your valuable home or small business electronics from transient surges with the Intermatic IG1300-4T-2C3 hardwired surge protective device. It provides greater capacity to handle surge energy (based on the close location to the service ground) compared to standard plug-in strips and is designed for 120/240-Volt single or single split-phase panels.

This hardwired Panel Surge Protector provides greater capacity to handle surge energy (based on its close location to the service ground) compared to standard plug-in strips and is designed for 120/240 volt single or (split-phase) panels. It features dual LED indicators which provide surge protection status on AC and (4) 30 inch 12-gauge leads. Offers 6 Mode protection for the sensitive electronic circuits in your computer, components and electronic appliances. When a surge occurs, the unit responds within 5 nanoseconds, diverting the destructive energy to ground while protecting equipment. Easy to install on main circuit breaker panel.

2nd Gen Smart GFCI Branch Circuit Breaker with Remote Control (ON/OFF) and Plug-On Installation. Supports both 120/208 and 120/240 VAC applications.

2nd Gen Smart Branch Circuit Breaker with Remote Control (ON /OFF) and Plug-On Installation. Supports both 120/208 and 120 /240 VAC applications.

2nd Gen Smart Branch Circuit Breaker with Remote Control (ON /OFF) and Plug-On Installation. Supports both 120/208 and 120 /240 VAC applications.

20A 2-Pole GFCI Branch Circuit Breaker with Hydraulic Magnetic Trip Technology and Plug-On Installation. Supports both 120 /208V and 120/240V applications.